520742
32
Zoom out
Zoom in
Previous page
1/84
Next page
- 31 -
www.vivotek.com
Video, camera mapping and motion detection
Enable video channels
Only when the video source is "Enable", the related link will be displayed in the main
page. There are four buttons for “Image setting”, “Camera setting”, “Motion detection”
and “Privacy mask” regarding to each video channel. The details are described in later
paragraphs. The video “Modulation” can be automatically detected by the system or
manually selected by administrators. Administrators can choose any video channel to be
“Default video source” shown in the main page when users connect at the first time.
Adjust image settings
"Time stamp" and "Text on image" will be enclosed in image for reference. The
timestamp is captured from date and time of Video Server that is maintained by an
on-board real-time clock. "Color" setting is independent of the connected camera and
B/W” option can speed up the encoder a little. “Default quality” option here will be
the default quality when users first connect to Video Server. “Default size” option here
will be the default size of video window when users first connect to Video Server. To
customize for different camera, administrators can adjust "Brightness", "Contrast",
"Hue" and "Saturation" for video compensation of each channel. While adjusting,
administrators can click on “Apply” to check prior to “Save” the setting in memory. If the
adjustment is not good, administrators can click on “Restore” to restore the original
settings without change. To facilitate the settings of four video channels, administrators
can click on “Save all” then every setting in this channel will copy to other channels. Note
that the “Text on image” may need to change for each channel. After configuration done,
click on “Close” to close this window. If parameters are changed without saving, they will
be used until the next system startup.
Configure attached motorized camera
In addition to configuring PTZ camera driver in Camera Control page, administrators
have to define the relationship between video channel and camera. If there is any PTZ
camera attached, administrators should select the “Camera type” as “PTZ camera”,
set the attached interface and the ID of the PTZ camera. The ID is specific to the camera
and necessary for multiple camera control. Refer to the manual of camera for ID settings.
After clicking on “Save”, the preset function will appear in the lower half of window. There
are up to twenty positions can be memorized. Administrators can move the camera and
then enter the position name and save. The old “Preset position” can also be pulled
down to delete.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vivotek VS2403 Video Server at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vivotek VS2403 Video Server in the language / languages: English as an attachment in your email.

The manual is 1,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vivotek VS2403 Video Server

Vivotek VS2403 Video Server Quick start guide - English - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info