519837
11
Zoom out
Zoom in
Previous page
1/56
Next page
- 10 -
www.vivotek.com
T: 886-2-82455282
F: 886-2-82455532
Initial Access to the Video Receiver
Check Network Settings
The Video Receiver can be connected either before or immediately after software
installation onto the Local Area Network. The Administrator should complete the
network settings on the configuration page, including the correct subnet mask and IP
address of gateway and DNS. Ask your network administrator or Internet service
provider for the detail information. By default the Video Receiver requires the
Administrator to run installation every time it reboots. Please refer to “Network
settings” on the System Configuration page for details. If any setting is entered
incorrectly and cannot proceed to setting up the Video Receiver, restore the factory
settings following the steps in the “Troubleshooting” chapter of the Appendix.
Add Password to Prevent Unauthorized Access
The default Administrator’s password is blank and the Video Receiver initially will not
ask for any password. The Administrator should immediately implement a new
password as a matter of prudent security practice. Once the Administrators password
is saved, the Video Receiver will ask for the user’s name and password before each
access. The user name for the Administrator is permanently assigned as “root”. Once
the password is changed, the browser will display an authentication window to ask for
the new password. Once the password is set, there is no provision to recover
the Administrator’s password. The only option is to restore to the original
factory default settings.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vivotek RX7101 NVR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vivotek RX7101 NVR in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vivotek RX7101 NVR

Vivotek RX7101 NVR Quick start guide - English - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info