Manual Vivotek PD8136 PTZ (page 80 of 183) (English)

519793

Zoom out

Zoom in

1/183

VIVOTEK

80 - User's Manual

PTZ > PTZ settings

Advanced Mode

This section explains how to control the Network Camera’s Pan/Tilt/Zoom operation.

The camera comes with built-in PTZ mechanisms.

Preset positions and patrol settings

In the PTZ settings page, you can select preset positions for the camera to patrol. A total of 20 preset

positions can be congured.

Please follow the steps below to congure preset positions and arrange them in a pan/tilt/zoom tour:

1. Adjust the shooting area to the desired position using the keypad on the upper right side of the

window. The default Home position refers to the center position defaulted in the factory. You might as

well select another area of interest as the “Home“ position. You should also select the speeds for the

actions that occur during the patrol; i.e., pan and tilt speeds.

2. Enter a name for a new preset position, which can contain up to forty characters. Click Add to enable

the settings. The preset positions will be listed on the User preset locations. (To add positions you

wish, please repeat steps 1~2.)

3. Select the preset positions and click on the Save button at the bottom of the screen.

4. Click on the move button (>>)

to move positions to the Patrol locations window.

5. You may select some or all of the imported positions as the stop points during the tour.

6. Enter a preferred dwell time before moving to the next position.

7. Select a speed level for the auto patrol tour.

8. Click on the Save button to preserve your conguration.

To remove a preset position from the list, select it and click Remove.

You can re-arrange the patrol order of the positions on the list using the

buttons.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Vivotek PD8136 PTZ in the language / languages: English as an attachment in your email.

The manual is 10,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vivotek PD8136 PTZ

Vivotek PD8136 PTZ Quick start guide - English - 10 pages

Vivotek PD8136 PTZ Quick start guide - German - 10 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Vivotek PD8136 PTZ Manual

Product: