519779
6
Zoom out
Zoom in
Previous page
1/12
Next page
EN - 5
English
WPS
Wireless Connection #1: Using the WPS Button
1. Make sure your AP (Access Point) and Operating System support WPS (Wi-Fi
Protected Setup) functions. WPS enables easy setup with compatible APs.
2. Use the included hex wrench to open the bottom cover.
3. Use the hex wrench to press the WPS button for 1 second.
The camera LED should flash green. When WPS configuration is done, wireless
connectivity will be established and the security encryption, such as WEP or WPA-
PSK, will be synchronized with the AP. Use the IW2 utility to find the camera. As for IP
setting, the camera's use of DHCP or static IP is determined by your configuration on the
network camera via the web-based configuration of firmware. The camera's default is
DHCP.
NOTE:
WPS Button
WPS Button
Wireless AP
1. WPS may not work if your AP is configured with a "hidden" SSID.
2. If no WPS-enabled AP is detected, the camera will continue searching for AP for 2
minutes. After that, the wireless setup will be cancelled.
When powered on, the camera LED should
light red for a minute, and then turn blue.
When lit blue, the camera operates in the AP
mode.
4. Press and hold down the WPS button on your AP (some router/AP will
have a virtual button on their management software instead). Refer to
your AP's documentation for details using its WPS functions.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vivotek IP8336W Fixed at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vivotek IP8336W Fixed in the language / languages: English as an attachment in your email.

The manual is 2,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vivotek IP8336W Fixed

Vivotek IP8336W Fixed User Manual - English - 202 pages

Vivotek IP8336W Fixed Quick start guide - German - 12 pages

Vivotek IP8336W Fixed Quick start guide - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info