519717
85
Zoom out
Zoom in
Previous page
1/199
Next page
VIVOTEK
User's Manual - 85
Mechanical PTZ Operation (When camera is mounted on an external pan/tilt scan-
ner)
If you have your camera mounted and connected to an external pan/tilt head via the
RS485 control lines, your can configure the Activated mode as “Mechanical�” You may
then set identical conguration both on your camera and the pan/tilt scanner. Refer to the
terminal block pin denitions on page 6 for RS485 connections.
Select the PTZ camera checkbox to open PTZ-related settings� The most widely used
RS485 protocol is Pelco-D� The camera translates IP-based PTZ commands into RS485
commands and sends them to an external pan/tilt scanner that then converts them to
motor movements� Doing so, the camera can pan or tilt to the desired view area�
As there are many pan/tilt heads or scanners on the market, you should test the
conguration with RS485 control connections when deploying the camera.
VIVOTEK provides five PTZ drivers including, DynaDome/SmartDOME, Lilin PIH-7x00,
Pelco D, Pelco P, and Samsung scc643 protocols� If none of these is supported by your
PTZ scanner, please select Custom camera (scanner)� Please refer to the documentation
of your PTZ scanner to determine the Camera ID, PTZ driver, and port settings� The
camera ID is required if you connect multiple cameras on an RS485 data bus� After you
enable the settings by clicking on the Save button, the Mechanical PTZ panel will be
available on the home page�
85


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vivotek IP8162 Supreme at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vivotek IP8162 Supreme in the language / languages: English as an attachment in your email.

The manual is 13,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vivotek IP8162 Supreme

Vivotek IP8162 Supreme Quick start guide - English - 12 pages

Vivotek IP8162 Supreme Quick start guide - German - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info