PARAMETER VALUE DESCRIPTION
addallow Add allowed IP address range to the server. Start and end parameters
must be specified. If the index parameter is specified, it will try to add
starting from the index position.
adddeny Add denied IP address range to the server. Start and end parameters must
be specified. If the index parameter is specified, it will try to add starting
from the index position.
deleteallow Remove allowed IP address range from server. If start and end parameters
are specified, it will try to remove the matched IP address. If index is
specified, it will try to remove the address from given index position.
[start, end] parameters have higher priority then the [index] parameter.
Method
deletedeny Remove denied IP address range from server. If start and end parameters
are specified, it will try to remove the matched IP address. If index is
specified, it will try to remove the address from given index position.
[start, end] parameters have higher priority then the [index] parameter.
start <ip address> The starting IP address to add or to delete.
end <ip address> The ending IP address to add or to delete.
index <value> The start position to add or to delete.
return <return page> Redirect to the page <return page> after the parameter is assigned. The
<return page> can be a full URL path or relative path according to the
current path. If you omit this parameter, it will redirect to an empty page.
Get SDP of Streams
Note: This request requires Viewer access privileges.
Method: GET/POST
Syntax:
http://<servername>/<network_rtsp_s<0~m-1>_accessname>
“m” is the stream number.
“network_accessname_<0~(m-1)>” is the accessname for stream “1” to stream “m”. Please refer to the
“subgroup of network: rtsp” for setting the accessname of SDP.
You can get the SDP by HTTP GET.
Open the Network Stream
Note: This request requires Viewer access privileges.
