519782
7
Zoom out
Zoom in
Previous page
1/161
Next page
VIVOTEK
User's Manual - 7
WPS
2
Wireless Connection: Using the WPS Button
1� Make sure your AP (Access Point) and Operating System support WPS (Wi-Fi
Protected Setup) functions� WPS enables easy setup with compatible APs�
2� Disconnect your LAN cable, and wait for the LED to turn red�
3� Press the WPS button for 1 second� You can then hear vocal instructions (in English)
from the camera speaker
4� Press and hold down the WPS button on your AP
(some router/AP will have a virtual button on their
management software instead)� Refer to your AP's
documentation for details using its WPS functions�
When WPS conguration is done, wireless connectivity will be established and the
security encryption, such as WEP or WPA-PSK, will be synchronized with the AP
Use the IW2 utility to nd the camera. As for IP setting, the camera's use of DHCP
or static IP is determined by your conguration on the network camera via the web-
based conguration of rmware. The camera's default is DHCP.
NOTE:
WPS Button
WPS Button
Wireless AP
1. WPS may not work if your AP is congured with a "hidden" SSID.
2� If no WPS-enabled AP is detected, the camera will repeat vocal instructions by
every 20 seconds, and if the camera still can not detect an AP after 2 minutes,
the wireless setup will be cancelled�
3. If a camera is assigned with a xed IP outside the AP's network segment, wireless
setup will fail�
4� A wired connection always has a higher priority, and hence wireless setup will not
take effect when the RJ45 LAN port is connected�
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vivotek IP8132 Fixed at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vivotek IP8132 Fixed in the language / languages: English as an attachment in your email.

The manual is 7,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vivotek IP8132 Fixed

Vivotek IP8132 Fixed Quick start guide - English - 10 pages

Vivotek IP8132 Fixed Quick start guide - German - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info