519751
177
Zoom out
Zoom in
Previous page
1/181
Next page
VIVOTEK
User's Manual - 177
Request 2 will not be accepted during the execution time(15 seconds).
8.23 Open Timeshift Stream (capability.timeshift > 0,
timeshift_enable=1, timeshift_c<n>_s<m>_allow=1)
Note: This request requires Viewer access privileges.
Syntax:
For HTTP push server (MJPEG):
http://<servername>/<network_http_s<m>_accessname>?maxsft=<value>[&tsmode=<value>&reftime=<v
alue>&forcechk&minsft=<value>]
For RTSP (MP4 and H264), the user needs to input the URL below into an RTSP compatible player.
rtsp://<servername>/<network_rtsp_s<m>_accessname>?maxsft=<value>[&tsmode=<value>&reftime=<va
lue>&forcechk&minsft=<value>]
n” is the channel index.
m” is the timeshift stream index.
For details on timeshift stream, please refer to the “TimeshiftCaching” documents.
PARAMETER VALUE DESCRIPTION
maxsft <positive
interger>
Request cached stream at most how many seconds ago.
tsmode normal,
adaptive
Streaming mode:
normal => Full FPS all the time.
adaptive => Default send only I-frame for MP4 and H.264, and send 1 FPS for
MJPEG. If DI or motion window are triggered, the streaming is changed to send
full FPS for 10 seconds.
(*Note: this parameter also works on non-timeshift streams.)
reftime mm:ss Reference time for maxsft and minsft.
(This provides more precise time control to eliminate the inaccuracy due to
network latency.)
Ex: Request the streaming from 12:20
rtsp://10.0.0.1/live.sdp?maxsft=10&reftime=12:30
forcechk N/A Check if the requested stream enables timeshift, feature and if minsft is
achievable.
If false, return “415 Unsupported Media Type”.
minsft <positive
interger>
How many seconds of cached stream client can accept at least.
(Used by forcechk)
Return Code Description
400 Bad Request Request is rejected because some parameter values are illegal.
415 Unsupported Media Type Returned, if forcechk appears, when minsft is not achievable or the
timeshift feature of the target stream is not enabled.
8. 24 Open Anystream (capability.nanystream > 0)
Note: This request requires Viewer access privileges.
Syntax:
For HTTP push server (MJPEG):
http://<servername>/videoany.mjpg?codectype=mjpeg[&resolution=<value>&mjpeg_quant=<value>&mjpeg
_qvalue=<value>&mjpeg_maxframe=<value>]
For RTSP (MPEG4), the user needs to input the URL below into an RTSP compatible player.
rtsp://<servername>/liveany.sdp?codectype=mpeg4[&resolution=<value>&mpeg4_intraperiod=<value>&mpe
g4_ratecontrolmode=<value>&mpeg4_quant=<value>&mpeg4_qvalue=<value>&mpeg4_bitrate=<value>&m
peg4_maxframe=<value>]
For RTSP (H264), the user needs to input the URL below into an RTSP compatible player.
rtsp://<servername>/liveany.sdp?codectype=h264[&resolution=<value>&h264_intraperiod=<value>&
h264_ratecontrolmode=<value>& h264_quant=<value>& h264_qvalue=<value>& h264_bitrate=<value>&
h264_maxframe=<value>]
<product dependent>
PARAMETER VALUE DESCRIPTION
codectype mjpeg, mpeg4, h264
<product dependent>
Set codec type for Anystream.
solution capability_videoin_resolution Video resolution in pixels.
mjpeg_quant 0, 1~5
99, 1~5
<product dependent>
Quality of JPEG video.
0,99 is the customized manual input setting.
1 = worst quality, 5 = best quality.
<product dependent>
mjpeg_qvalue 10~200
2~97
<product dependent>
Manual video quality level input.
(This must be present if mjpeg_quant is equal to 0, 99)
<product dependent>
mjpeg_maxframe 1~25,
26~30 (only for NTSC or
60Hz CMOS)
Set maximum frame rate in fps (for JPEG).
177


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vivotek FD8162 Supreme at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vivotek FD8162 Supreme in the language / languages: English as an attachment in your email.

The manual is 10,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vivotek FD8162 Supreme

Vivotek FD8162 Supreme Quick start guide - English - 13 pages

Vivotek FD8162 Supreme Quick start guide - German - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info