519751
137
Zoom out
Zoom in
Previous page
1/181
Next page
VIVOTEK
User's Manual - 137
0: off
1: auto
2: always on
3: keep current value
wdrc_strength 0~2 4/4 WDR enhanced.
0: low
1: medium
2: high
agc 0,1,2 4/4 Set auto gain control to normal level or MAX level.
0->2x,
1->4x,
2->8x
(not used in FD8162)
agcmode auto,fixed 4/4 Set auto gain control mode.
maxgain 0~100 4/4 Manual set maximum gain value.
mingain 0~100 4/4 Manual set minimum gain value.
autoiris <boolean> 4/4 Enable auto Iris.
(not used in FD8162)
7.10 IR cut control
Group: ircutcontrol (capability.nvideoinprofile > 0)
NAME VALUE SECURITY
(get/set)
DESCRIPTION
mode auto,
day,
night,
di,
schedule
<product
dependent>
6/6 Set IR cut control mode
daymodebegintime 00:00~23:59 6/6 Day mode begin time
daymodeendtime 00:00~23:59 6/6 Day mod end time
bwmode <boolean> 6/6 Switch to B/W in night mode if enabled
sensitivity low,
normal,
high
6/6 Sensitivity of light sensor
7.11 Image setting per channel
Group: image_c<0~(n-1)> for n channel products
NAME VALUE SECURITY
(get/set)
DESCRIPTION
brightness -5~5 4/4 Adjust brightness of image according to mode
settings.
saturation -5~5,100 4/4 Adjust saturation of image according to mode settings.
100 for saturation percentage mode.
saturationpercent 0~100 4/4 Adjust saturation value of percentage when
saturation=100
contrast -5 ~ 5 4/4 Adjust contrast of image according to mode settings.
sharpness -3~3,100 4/4 Adjust sharpness of image according to mode settings.
sharpnesspercent 0~100 4/4 Adjust sharpness value of percentage when
sharpness=100
gammacurve 0~100 4/4 Gamma curve.
lowlightmode <boolean> 4/4 Enable/disable low light mode.
profile_i0_enable <boolean> 4/4 Enable/disable this profile setting
profile_i0_policy day,
night,
schedule
4/4 The mode which the profile is applied to.
profile_i0_begintim
e
hh:mm 4/4 Begin time of schedule mode.
profile_i0_endtime hh:mm 4/4 End time of schedule mode.
profile_i0_contrast -5 ~ 5 4/4 Adjust contrast of image according to mode settings.
profile_i0_sharpne
ss
-3~3 4/4 Adjust sharpness of image according to mode settings.
profile_i0_sharpne
sspercent
0~100 4/4 Adjust sharpness value of percentage when
sharpness=100
profile_i0_gammac
urve
0~100 4/4 Gamma curve
profile_i0_lowlight
mode
<boolean> 4/4 Enable/disable low light mode.
profile_i0_wdrcstre
ngth
0~2 4/4 WDR enhanced
0: low
1: medium
2: high
profile_i0_wdrcmo 0~3 4/4 WDR enhanced
137


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vivotek FD8162 Supreme at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vivotek FD8162 Supreme in the language / languages: English as an attachment in your email.

The manual is 10,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vivotek FD8162 Supreme

Vivotek FD8162 Supreme Quick start guide - English - 13 pages

Vivotek FD8162 Supreme Quick start guide - German - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info