Manual Vivanco ur zap 2 (page 2 of 25) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish)

122475

Zoom out

Zoom in

1/25

Vivanco GmbH, Ewige Weide 15, D-22926 Ahrensburg, Tel:+49 (0)4102

231235, Fax: +49(0)4102 231444, e-Mail: hotline@vivanco.de 2

(GB) Instructions

UR Zap 2 remote control for TV sets, satellite receivers

and cable boxes

1 Inserting the batteries

Open the battery flap on the back of the remote control and

insert 2 alkaline AAA batteries. Check that the polarity

markings on the batteries and in the battery compartment are

correctly lined up (+=+), then close the flap carefully. – Always

use undamaged, fully charged batteries.

2 Adapting to appliances

In order to control your appliances you must adapt or set the

remote control to them. There are two ways of doing so: direct

control code entry or code search.

2.1 Direct control code entry using the enclosed list

Example: setting to control a Panasonic television set:

2.1.1 Using the TV button, select to control a television set

(TV).

2.1.2 The enclosed list gives, for example, the Panasonic

Code 241.

Please make sure you have selected the correct list for

television sets (TV).

2.1.3 To prepare code entry, keep the Mute (sound on/off)

button and the PWR (appliance on/off) button pressed

simultaneously(!) until the lamp (LED) lights constantly.

2.1.4 Then enter the code numbers as follows:

2.1.4.1 1st number of code (hundreds = Volume -): Press the

VOL- (volume down) button- twice for 2 of 241. Press as

often as the number indicates. (1=once, 2 = twice, etc.)

2.1.4.2 2nd number of code (tens = Channel+): Press the

CH+ (channel up) button four times for the 4 of 241.

2.1.4.3 3rd number of code (ones = Volume+): Press the

VOL+ (volume up) button once for the 1 of 241.

2.1.4.4 Finally, press the Mute button again briefly. The lamp

(LED) goes out. To enter a 0, do not press any button. If

incorrect entries are made the remote control blinks for about 3

seconds.

2.1.5 Then test the control code setting by trying to control (in

this example) your television set. If it does not work at all or not

correctly try a different code from the list or code search (see

below).

2.1.6 To make the setting for a satellite receiver or a cable

box, press the SAT button instead of TV and enter a satellite

code accordingly.

2.2 Code search

If the brand of your appliance is not in the list or none of the

codes given fits, we recommend a code search.

2.2.1 Switch on the appliance to be controlled. Program is

running. A channel number, for example, appears in the

display of your satellite receiver.

2.2.2 Press the TV or SAT appliance button according to the

appliance type to be controlled, e.g. SAT.

2.2.3 Keep the ON/OFF PWR (appliance on/off) and Mute

buttons pressed simultaneously(!) until the lamp lights

constantly.

2.2.4 Press the ON/OFF PWR (appliance on/off) button once

briefly.

2.2.5 The UR Zap 2 emits a different signal every 1.3

seconds. When your appliance reacts, very quickly press the

Mute button to confirm a functioning control code. – It is

advisable to have your finger already placed on the Mute

button so that you can react quickly enough. Otherwise the UR

Zap 2 emits the next signal before you have reacted.

2.2.6 Finally, test the control code setting by trying to control

your SAT appliance. If it does not work correctly, please try the

code search again.

Note: Remember to switch your appliance, e.g. SAT, back on

again if you wish to continue searching.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Vivanco ur zap 2 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 0,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Vivanco ur zap 2 Manual

Product: