Manual Vivanco ur 810 (page 3 of 34) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish)

122761

Zoom out

Zoom in

1/34

UR 810 UNIVERSAL CONTROLLER

Vivanco GmbH, D-22926 Ahrensburg, E-Mail

: hotline@vivanco.de

, Helpline: +49 (0) 4102 231135 3

original remote control (e.g. POWER) until the

LED (e.g. DVD) on your UR 810 remote control

blinks twice, then lights up for 2 seconds and

then starts blinking again.That indicates that a

new function code, e.g. POWER, has been

learnt.

6 Repeat steps 4 to 5 to for capturing more

key functions. - If there is a learning(capturing)

problem, the LED blinks 4 times, lights up for 2

seconds and then will start blinking again.

Then start capturing the key function again at

step 4.

7 Press and release device key for exit of

learning mode. – The controller will exit the

learning mode automatically after about 30

seconds of inactivity.

Reset/deletion of all captured key functions

per device: press the right device selection

key, e.g. DVD, and then SET and 4 together in

order to delete all learnt functions. The

appropriate device key LED will flash twice for

confirmation.

Memory full indication: if the memory is full, a

LED blink 4 times and then the controller will

exit learnning mode.

Operation

You operate your appliances basically in

exactly the same way as if you were using the

original remote controls, except that you must

first press an appliance button (TV, DVD, etc.)

to control the required appliance. As the

symbols on the UR 810 could differ from those

on the original remote controls you may have

to try out all the buttons in order to find the

functions.

Special settings and functions

1. Assigning volume and mute

exclusively to one appliance (punch through

function: Press the appliance button of the

appliance that you always want to use for

volume control, e.g. DVB. To lock, press SET

and 5. To unlock, press SET and 6.

2. Device Selection Key Shift: In order

to change the function of a device selection

key, e.g. change device key AUX1 to a second

SAT device key proceed as follows:

a) Press SET hold it and then press the to be

changed device key, e.g. AUX1. Then release

both keys and the AUX1 light will be on.

b) Press SAT, the light goes off and you can

enter another SAT code for a second SAT or

DTT receiver under AUX1.

c) You can reset this function by pressing SET

and the modified device key (AUX1)

simultanously until the LED goes on. Then

release the keys and press the modified device

key (AUX1) again.

3. Locking and unlocking a set device

key: Press the appliance key of the appliance

that you always want to be locked. Preset code

not changeable. To lock, press SET and 7. To

unlock, press SET and 8.

4. Reset remote control to factory

settings: Press SET and 0 simultanously for

more then 3 seconds. A LED will flash twice

and all user settings will be deleted

Specifications

Batteries: 2x AAA batteries, R03, UM4

Range: max. 7 m

Not for 400 kHz equipment

2-year works guarantee

Should your UR 810 cease to work within 2

years of purchasing you will receive a free

replacement from VIVANCO. Exceptions:

missing codes, deliberate destruction and

normal wear and tear of the housing and

buttons.

(D) Bedienungsanleitung

Fernbedienung Vivanco UR 810 für fast alle

Fernseh-, Audio-, Video und anderen

infrarotsteuerbaren Geräte

Batterien einlegen

Bitte öffnen Sie die Batterieklappe an der

Geräterückseite, Klappe leicht nach

untenschieben, und legen Sie 2 Alkali-

Mikrozellenbatterien ein. Achten Sie auf die

angegebenen Polaritäten auf Batterien und im

Batteriefach (+=+), und schließen Sie das Fach

wieder vorsichtig. – Bitte achten Sie darauf,

immer einwandfreie Batterien zu verwenden.

Geräteanpassung

Um Ihre Geräte steuern zu können, müssen

Sie die Fernbedienung für Ihre Geräte

einstellen. Dazu gibt es zwei Möglichkeiten: die

direkte Steuerkodeeingabe und die

Kodesuche.

Wenn die UR 810 Sie nicht versteht, dann

blinkt sie 2 Mal und Sie können danach die

Eingabe wiederholen. Jede verstandene

Eingabe quittiert sie mit einem kurzen Blink

ihrer LED-Anzeigelampe.

Die direkte Steuerkodeeingabe mithilfe der

beigefügten Liste

Beispiel: Einstellung der Fernbedienung für ein

Panasonic-Fernsehgerät:

1. Aus der beigefügten Liste

entnehmen Sie z.B. den Panasonic-Code 153.

Bitte vergewissern Sie sich, dass Sie die

korrekte Liste für Fernseher (TV) gewählt

haben.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Vivanco ur 810 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 1,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Vivanco ur 810 Manual

Product: