464652
5
Zoom out
Zoom in
Previous page
1/88
Next page
3 Press the button of which the captured func-
tion shall be deleted, e.g. 3, briefly. The LED
will flash once and the learnt button function
is deleted.
4 Press and release LEARN button for exit of
deletion mode.
Reset/deletion of all learnt button functions
for a device
1 Press SELECT button to select device, of
which all learnt button codes shall be deleted,
as often until requested device LED e.g. TV
is on.
2 Press LEARN button and then 3 button simul-
taneously until device lamp (LED) goes out.
Then release buttons. LED will flash twice. All
learnt button functions of selected device will
be deleted.
Assigning volume and mute button exclus-
ively to one appliance (punch through)
1 Press (power) button and then VOLUME+
button simultaneously until device lamp (LED)
lights constantly.
2 Press SELECT button to select the device,
which always shall be used for volume con-
trol, as often until requested device LED, e.g.
TV, is on.
3 Press OK (or ) button
Disable volume and mute button punch
through function
1 Press (power) button and then VOLUME-
button simultaneously until device lamp (LED)
lights constantly.
2 Press 0 button and punch through will be dis-
abled
Program Macros (Home Cinema Applica-
tion)
(UR 2400 only)
You can program up to 5 sequences, called
macros, of up to 16 control commands each to
be output on pressing on one single button.
1 Press LEARN button and then (power)
button simultaneously until a device lamp
(LED) lights constantly.
2 Press SELECT button to select the device
mode on which you like to set a macro button,
e.g. until TV LED is on.
3 Press any button except LEARN and SE-
LECT, e.g. RED, which you like to operate a
macro sequence. LED flashes twice and then
stays on.
4 Program the macro sequence, e.g. "All
Devices Off", by pressing buttons SELECT
TV, (power), SELECT SAT/DVB,
(power), SELECT BLURAY/DVD, (power),
SELECT HTS/AMP, (power).
- When memory is full LED flashes twice and
macro input is terminated.
5 Press LEARN button to save macro and ter-
minate input mode.
6 Test macro by pressing the selected macro
button, e.g. RED. Then all devices shall be
switched off one after another.
Vivanco GmbH, D-22926 Ahrensburg, E-Mail: hotline@vivanco.de, Helpline: +49 (0) 4102 231135
5
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vivanco UR 2300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vivanco UR 2300 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info