653451
9
Zoom out
Zoom in
Previous page
1/40
Next page
MACHINE ASSEMBLY
Accelerator Tool
The accelerator tool prevents an air bubble from
forming while blending and allows for the processing of
very thick and/or dicult-to-process frozen mixtures.
While the machine is running, use the accelerator tool
to push ingredients into the blades.
Using the Accelerator Tool:
If thick mixtures stop circulating, you may
have trapped an air bubble. Insert the accelerator
tool through the lid and stir to release it.
Use it only with the lid locked in place and
lid plug removed.
The splash disk (near the top of the accelerator tool) and
lid prevent the accelerator tool from hitting the blades.
The container should not be more than
⅔ full when the accelerator tool is used.
Do not use the accelerator tool for more than 30
consecutive seconds (to avoid overheating).
Holding the accelerator tool straight should allow
extra-thick ingredients to circulate. If not, point
the accelerator tool toward the side or corner
of the container.
16
17
CARING FOR YOUR MACHINE
IMPORTANT NOTES!
Cleaning Products: Do not use abrasive cleaning agents or concentrated
bleach when cleaning. Do not use any cleaners containing quanitary sanitizers on
polycarbonate components (i.e., Advance containers, covers). Do not use any of
the following cleaning products: automatic dishwashing detergents, oven cleaners,
steel wool or other abrasive pads.
Splash Disk
Splash Disk
WARNINGS!
Do not force the accelerator tool into the container. Excessive force may
cause the accelerator tool to extend too far into the container and may
cause damage to the blades.
Do not use the older accelerator tool that has a straight and smooth surface
and no “step.” Use of the older model may cause damage to the blades.
When processing hot liquids or mixtures:
The two-part latching lid must be securely locked in place. Do not use the one
piece lid or a non-latching lid. This allows steam to escape naturally and will
prevent the lid from coming o when the machine is turned on.
Do not start processing hot liquids on high speed. Always start processing hot
liquids on low speed, then switch to high speed while the machine is running.
Use caution with hot liquids. Liquids may spray from under the lid plug or
escaping steam may cause scalding.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vitamix XL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vitamix XL in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 3,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info