653443
20
Zoom out
Zoom in
Previous page
1/23
Next page
Retainer Nut Removal
• The retainer nut is easily removed using the Retainer Nut
Wrench. To order a Retainer Nut Wrench please call your
Vita-Mix distributor and ask for Item #15596.
• To remove, turn the container upside. Using the Retainer Nut
Wrench turn the wrench counterclockwise to loosen the nut.
Once loosened, remove by hand.
• To replace, position retainer nut on top of blade assembly
and hand tighten. Then, using the Retainer Nut Wrench,
tighten clockwise until it stops. If it is not tight enough, you
will notice increased container noise.
Blade Agitator Assembly. Use caution when handling the blade; it is
sharp. When inserting the blade assembly through the container
bottom, grip the blades with a soft cloth, align the flat sides of the blade
assembly with the flat sides of the container. Place the retainer nut
back on the inserted blade assembly and tighten clockwise.
Do not
force.
Do not attempt to disassemble blade assembly.
Drive Spline. Mates with drive socket on the motor base to turn the
blade. NOTE: Removing and replacing your container while the
coupling is still rotating will strip the drive spline “teeth”. (This part is
NOT removable.)
Retainer Nut. Must be snug. Use the available retainer nut wrench
for best results. (Refer to the diagram below to remove or replace.)
4
8
16
24
32
Never use a blade assembly with loose, damaged or nicked components.
lade Agitator Assembly
B
20
Retainer Nut Wrench
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vitamix T G 2 - Blending Station at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vitamix T G 2 - Blending Station in the language / languages: English as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info