540745
26
Zoom out
Zoom in
Previous page
1/32
Next page
BLENDING IN THE
40 OUNCE (1.2 L) CONTAINER
1. To begin, put a seal onto the bottom thread of the blade
base. The seal should fit snugly and evenly around the thread.
WARNING
Parts will become hot with extended use.
DO NOT touch the drive socket in the underside of the blade base or the drive spline
inside the motor base.
When blending hot liquids in the 40 ounce (1.2 L) container, escaping steam, splashes or
contents may scald.
To secure the contents, lock the lid and lid plug securely in place prior to blending hot
liquids in the 40 ounce (1.2 L) container.
Rotating blades can cause severe injury.
DO NOT reach into container while machine is running.
To avoid damage or personal injury, DO NOT use the 40 ounce (1.2 L) container (including
the blade base, seal, lid and lid plug) in the microwave.
SCALE 1.000
Seal
Blade Base
2. Thread the blade base onto the 40 ounce (1.2 L) container
in a clockwise direction just until tight. Do not overtighten
or leaking can occur.
26
Liquids (water, juice, yogurt)
Fruits and Veggies
Leafy Greens
Ice and Frozen Ingredients
Dry Goods
(grains, seasonings, powders)
40 ounce (1.2 L)
Container
3. Load the 40 ounce (1.2 L) container according to
the recipe.
4. Put the lid onto the 40 ounce (1.2 L) container.
Make sure that the tabs on the lid snap onto
the container.
5. Insert the lid plug into the opening in the lid.
Turn the lid plug counterclockwise to lock.
Pull up on the lid plug to make sure it is secure.
6. With the variable speed control pointed at stop
(O), set the 40 ounce (1.2 L) container onto the
This icon corresponds to suggested recipes for the 40 ounce (1.2 L) container in your cookbook.
Blade Base
motor base with the container handle facing you. The interlock tabs on the 40 ounce (1.2 L) container will
lower into the cutouts in the motor base.
7. Begin blending by slowly turning the variable speed control to the desired variable speed setting or left
of center to pulse. Follow the recipe guidelines to finish the blend.
8. Wait until the blades come to a complete stop before removing the lid or the container from the
motor base.
9. Empty the container. Unthread the blade base from the container in a counter-clockwise direction.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vitamix S30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vitamix S30 in the language / languages: German as an attachment in your email.

The manual is 2,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vitamix S30

Vitamix S30 User Manual - English - 32 pages

Vitamix S30 User Manual - Dutch - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info