540745
8
Zoom out
Zoom in
Previous page
1/32
Next page
CONTROL PANEL
1
2
3
1. Power Indication: When the stop symbol (O) brightens, this indicates that the machine is plugged in
and power is flowing.
Before beginning any blending cycle, always make sure that the variable speed
control is pointed at the stop symbol (O).
Unplug the machine whenever it will be left unattended.
The light at the stop symbol on the control panel will behave in these ways:
Slow flash – machine is plugged in but the container is not properly in place on the motor base
Solid (no flash) – machine is plugged in, the container is in place, and the machine is ready to blend
Fast flash – error caused by one of the following: (reset required, see instructions below)
A. The motor base is plugged in while the variable speed control is not in the stop position (O).
B. The container was placed on the machine while the variable speed control was not pointed at the
stop symbol (O).
C. The container was removed from machine while operating (could include lifting the container away
from the motor base and the interlock tabs losing contact with the base during tamping).
To Reset:
A. Make sure that both interlock tabs on the container are fully seated in the cutouts in the motor base.
B. Turn the variable speed control counterclockwise back to the stop symbol (O).
2. Variable Speed Control: Selects blade rotation speeds from 1 to 10 (low to high). Always begin
the blending with the variable speed control set to the stop symbol (O). To begin, rotate the variable
speed control clockwise to the desired speed setting. To stop, rotate the variable speed control
counterclockwise back to the stop symbol (O).
3. Pulse ( ): Rotating the variable speed control to the pulse position will cause the machine to blend at
50% of high speed for as long as it is held in this position. The pulse feature can be used to chop
ingredients by quickly rotating the variable speed control to the pulse position, releasing and repeating
until the desired consistency is reached.
8
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vitamix S30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vitamix S30 in the language / languages: English as an attachment in your email.

The manual is 2,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vitamix S30

Vitamix S30 User Manual - German - 32 pages

Vitamix S30 User Manual - Dutch - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info