540735
5
Zoom out
Zoom in
Previous page
1/80
Next page
5
Pro-500 and Total Nutrition Center 3 Models
3
5
6
1
2
1. On/O Switch (l)/(O): The On/O Switch controls the power to the machine base. The On/O Switch is located on the front of the
machine. After plugging in the unit, make sure the marker on the Variable Speed Dial is pointed at the Stop Symbol ( ) at the top of
the dial and move the On/O Switch to the On position.
Move the On/O Switch to the O position at night and whenever the machine will be left unattended.
If the On/O switch is moved to the O position to stop a program mid-cycle, wait 30 seconds for power to recycle and the timer to
reset before moving the On/O switch to the On position.
2. On/O Light: The On/O light is located on the front of the machine above the On/O switch. When lit, the machine is plugged in and
the On/O switch is in the On position. The light will flash when a program is near completion.
3. Start ( )/Stop ( ) Switch: After the marker on the Variable Speed Dial is rotated o of the Stop Symbol ( ) to either Variable Speed
1 or a Program setting, press the Start/Stop Switch to start the machine and initiate the blending process. Pressing the Start/Stop
Switch again will stop the blending process.
Programs can be interrupted by pushing down the Start/Stop switch at any time. If reactivated by pushing down the Start/Stop switch,
the program will start at the beginning.
4. Pulse Switch ( ): Variable Speed: Pressing down on the Pulse Switch will cause the machine to blend at the speed setting shown on
Variable Speed Dial for as long as the Pulse Switch is held down. The Pulse function can be used when a program is selected. Pushing
down the Pulse switch when a program is selected will cause the machine to run at 50% of high power for as long as the Pulse switch
is pushed down.
3
4
CONTROL PANEL (CONTINUED)
5. Variable Speed Dial: The Variable Speed Dial serves two functions; the use of three programs settings or ten variable speed settings.
• To use programs: rotate the Variable Speed Dial to the left to the desired program.
• To use Variable Speed:
a. Rotate the Variable Speed dial right to 1.
b. Press down on the Start/Stop switch.
c. Rotate the Variable Speed dial between 1 and High during the blending cycle to increase or decrease the speed of the blades.
d. At the end of the blending cycle, rotate the Variable Speed Dial back to the Stop Symbol ( ).
6. Programs: Your machine is equipped with three program settings for the most commonly used recipes. Rotating the Variable Speed
Dial left of center allows you to select a program for Smoothies, Frozen Desserts, and Hot Soups. These programs are optimized
for these recipe categories, but may also work well with other recipe choices. Programs vary in blending speed and duration and
will automatically stop at the end of the program. Programs can be interrupted by pushing down the Start/Stop switch at any time.
If reactivated by pushing down the Start/Stop switch, the program will start at the beginning.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vitamix Professional Series 500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vitamix Professional Series 500 in the language / languages: English, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vitamix Professional Series 500

Vitamix Professional Series 500 User Manual - English - 72 pages

Vitamix Professional Series 500 User Manual - German - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info