540729
9
Zoom out
Zoom in
Previous page
1/24
Next page
9
CONTROL PANEL
1. On/Off Switch (l)/(
O
): The switch is located on the front left side of the machine below the control
panel and below the On/Off light.
The On/Off Switch controls the power to the machine.
BEFORE moving the On/Off Switch to the On
(I)
position, make sure the marker on the Variable Speed Dial
is pointed at the Stop Symbol ( ) at the top of the dial.
After plugging in the unit, move the On/Off Switch to the On position to ready the machine for blending.
Move the On/Off Switch to the Off position at night and whenever the machine will be left unattended.
If the On/Off switch is moved to the Off position to stop a program mid-cycle, wait 30 seconds for power to
recycle and the timer to reset before moving the On/Off switch to the On position.
When the Pulse, Start/Stop, and Program Symbols brighten, the On/Off Switch is in the On position and
power is flowing.
.
2. On/Off Light: The light is located on the front left side of the machine below the control panel and
above the On/Off switch. (See illustration above.) When lit, the machine is plugged in and the On/Off
switch is powered On. The power light will flash when a pre-programmed setting is used to indicate that
the program is near completion. Push down the Start/Stop switch to activate a program or initiate
continuous Variable speed operation.
3. Start ( )/Stop ( ) Switch:
After the marker on the Variable Speed Dial is rotated off of the Stop Symbol ( ) to either Variable
Speed 1 or a Program setting, press the Start/Stop Switch to start the machine and initiate the blending
process. Pressing the Start/Stop Switch again will stop the blending process.
Programs can be interrupted by pushing down the Start/Stop switch at any time. If reactivated by pushing down
the Start/Stop switch, the program will start at the beginning.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vitamix Certified Reconditioned PreProgrammed at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vitamix Certified Reconditioned PreProgrammed in the language / languages: English as an attachment in your email.

The manual is 0,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info