540730
14
Zoom out
Zoom in
Previous page
1/24
Next page
14
Wet Blade Container
Designed for processing liquids including juice, frozen mixtures, sauces, soups, purées, batters, and for
wet chopping.
1.
Make sure that the Variable Speed Dial is set to 1
.
2.
Load the container before placing it on the motor base. Place liquids and soft foods in the container
first, solid items and ice last. Although not necessary for blending, you may want to cut or break food
into smaller pieces for more precise measuring of ingredient
s.
3.
Securely fasten the 2-Part lid. Always use the complete 2-Part lid when blending (unless the tamper is
inserted through the lid plug opening). Especially when blending hot ingredients, make sure that the lid is
securely latched.
4.
With the motor o, set the wet blade container on the motor base by aligning it over the centering pad.
Never attempt to put a container on an operating motor base or to operate a motor base without a
container properly in place
.
5. Start with the On/O Switch in the On position. Always start your machine on variable speed 1.
Activate the machine by lifting up the Start/Stop Switch to the Start (
) position and slowly increase
the variable speed to the desired speed. Your container will shift and get into an aligned position.
6. If the mixture stops circulating, you may have trapped an air bubble. If inserting the tamper through the lid
plug while blending does not release it, reduce the speed on the dial to variable speed 5. Use the tamper
to stir until it “burps.” If these methods do not work, stop the motor, remove the container from the motor
base, and use a rubber spatula to press the air bubble away from the blades. Return the container to the
motor base, replace the lid, and continue blending.
7.
Take proper care when handling and processing hot ingredients and making hot soups and sauces
.
8.
Due to the machine’s speed, processing times are much quicker than standard appliances. Until you are
accustomed to the machine, count your time carefully to avoid over-processing
.
9.
After turning the machine o, wait until the blades completely stop before removing the lid or container
from the motor bas
e.
Never Start on Speeds Above 1 with
Hot Liquids to Avoid Possible Burns.
Use Caution; escaping steam or
splashes may scald.
Lock the lid. This will prevent
expansion from aecting the
position of the lid when the
machine is turned on.
Start on Variable 1, slowly
increase to 10.
CAUTION
OPERATING INSTRUCTIONS
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vitamix Certified Reconditioned Next Generation at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vitamix Certified Reconditioned Next Generation in the language / languages: English as an attachment in your email.

The manual is 0,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info