Manual Vitalmaxx GWF174 - Z09215 (page 4 of 8) (English, German, Dutch, French)

703312

Zoom out

Zoom in

1/8

Usage

PLEASE NOTE

■ For hygiene reasons, the product should only be used by one

person. Thoroughly clean the attachment used immediately

after use.

■ Do not use peeling products on affected areas of the skin be-

fore or after use.

■ Do not use the product more than once a week on dry skin and

twice a week on oily or combination skin.

■ Do not use for more than 5 minutes.

■ Test the product on the forearm before ﬁ rst use. If the skin does

not react undesirably, the product can be used on the face.

■ Tingling and reddening of the skin is normal during use and

should disappear within half an hour.

■ To prevent blemishes forming, keep the attachment steady

on the skin during use. It is recommended to stretch the skin,

e. g. on the cheeks, with your ﬁ ngers, so it is not sucked in.

■ Move the product slowly in strips. Do not circle and do not

press the skin!

Remove make-up before treatment and clean the face as usual.

Clean the face after each treatment and apply a care product.

Four attachments are included in delivery:

• Large round pore attachment for pore cleansing, not suit-

able for the eye area

• Small round pore attachment for pore cleansing in places

that are difﬁ cult to reach, e. g. in the nose area, not suitable for

the eye area

• Oval attachment to stimulate blood circulation in the skin

• Microcrystalline attachment for microdermabrasion: Re-

moval of dead skin ﬂ akes by friction and suction on the face,

elbows, knees, etc.

Pore cleansing

Tip: For best results, pores should be opened before use. Dip a

small clean towel in hot water, wring it out and put it on the face.

Alternatively, you can carefully hold the face over a bowl of hot

water or use the product directly after showering or bathing.

1. Dab the face dry.

2. Put the round pore attachment on the suction head.

3. Slide the on / off switch upwards. The product switches on.

4. To remove sebum and blackheads, place the pore attach-

ment on the skin and move it slowly over the skin in small strips

from the middle of the face to the outside. Only pull the strips in

one direction. If necessary, repeat the process. Brieﬂ y suck in

acne, then quickly remove the pore attachment again. Do not

move to the sides!

5. After treatment, switch off the product by sliding the on / off

switch downwards.

6. Remove the pore attachment and clean it.

Microdermabrasion

1. Dry the face well.

2. Put the microcrystalline attachment on the suction head.

3. Slide the on / off switch upwards. The product switches on.

4. Start with facial treatment on the chin and work your way to

the forehead. Slowly move the microcrystalline attachment

outward in strips from the middle of the face. Only pull the

strips in one direction and do not press the product! Please

note: The microcrystalline attachment can also be used on

body parts such as elbows or knees.

5. After treatment, switch off the product by sliding the on / off

switch downwards.

6. Remove the microcrystalline attachment and clean.

Stimulate skin circulation

1. Dry the face well.

2. Put the oval attachment on the suction head.

3. Slide the on / off switch upwards. The product switches on.

4. Brieﬂ y suck in skin areas where wrinkles form (e. g. around

the mouth), then quickly remove the oval attachment. Do not

repeat too often in one place, so that blemishes don’t form!

5. After treatment, switch off the product by sliding the on / off

switch downwards.

6. Remove the oval attachment and clean.

Cleaning and storage

PLEASE NOTE

■ Never use corrosive or abrasive cleaners.

• Clean the attachments under running water immediately after

each use. If necessary, use a mild detergent and cotton buds.

• If necessary, wipe the product with a damp cloth and then dry it.

• Keep the product away from dust, dirt and direct sunlight in a

dry place away from children and animals.

Maintenance

• If the attachments on the suction head do not hold, one of the

silicone rings may be damaged and must be replaced. Delivery

includes replacement silicone rings.

• Replace the ﬁ lter in the suction head if it is dirty. Delivery

includes replacement ﬁ lters.

Change ﬁ lter

1. Pull the insert out of the suction head

(see image).

2. Use a pointed object (e. g. needle, twee-

zers) to pry the dirty ﬁ lter out of the suc-

tion head.

Similar to the one shown.

3. Insert a fresh ﬁ lter into the suction head.

4. Insert the insert back into the suction head.

Technical data

Article number: 09215

Model number: GWF174

Power supply: 3 V DC (2 x 1.5V; type AA)

Operating instrutions ID: Z 09215 M DS V1 0419

Disposal

Dispose of packaging materials in an environmentally sound

way and take recyclables to collection facilities.

Remove batteries before disposing of the product and take

them to the appropriate collection site separately from the

product.

This product is subject to European Directive 2012/19/EU

on Waste Electrical and Electronic Equipment (WEEE). Do

not dispose of the product as normal household waste, but

through an ofﬁ cially approved disposal business according

to environmental regulations.

Article number: 09215

EN Operating Instructions

Customer Service / Importer:

DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Germany •

✆ +49 38851 314650 *)

*) Calls to German landlines are subject to your provider’s charges.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Vitalmaxx GWF174 - Z09215 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Vitalmaxx GWF174 - Z09215 Manual

Product: