704367
8
Zoom out
Zoom in
Previous page
1/44
Next page
DE 8
2. Schrauben Sie die Standfüße an die Unterseite des
Fahrradrahmens. Verwenden Sie dazu die entsprechen-
den Schrauben, Unterlegscheiben und Muttern.
Achten Sie auf die richtige Position der Standfüße! Die
Hutmuttern dürfen nicht von unten angebracht werden, da
das Gerät sonst nicht fest auf dem Boden stehen kann.
Hinweis: Die Schutzkappen lassen sich drehen, sodass
Sie das Gerät in eine standfeste Position bringen können.
3. Setzen Sie den Sattel auf die Sattelhalterung und schrau-
ben Sie ihn mithilfe der Unterlegscheiben und der selbst-
sichernden Muttern fest. Achten Sie dabei darauf, dass
diese nur mithilfe von Werkzeug fest- bzw. wieder abge-
dreht werden können.
4. Setzen Sie die Sattelhalterung in die Aufnahme am
Fahrradrahmen. Befestigen Sie sie mithilfe des Einstell-
knopfes: Richten Sie die Löcher am Rahmen und der Hal-
terung aneinander aus und drehen Sie den Einstellknopf
im Uhrzeigersinn fest.
Hinweis: Die korrekte Sattelhöhe können Sie nach dem
Aufbau einstellen.
5. Schrauben Sie den Handgriff an den Fahrradrahmen.
Verwenden Sie hierzu die entsprechenden Sechs-
kantschrauben und Unterlegscheiben.
6. Befestigen Sie die Computerhalterung am Handgriff, in-
dem Sie sie auf den Handgriff setzen und mit den ent-
sprechenden Schrauben und Unterlegscheiben fest-
schrauben.
7. Schieben Sie den Trainingscomputer auf die Computer-
halterung.
8. Stecken Sie den Klinkenstecker vom Fahrradrahmen in
die Anschlussbuchse am Trainingscomputer. Damit wird
der Computersensor mit dem Tretwerk verbunden.
9. Drehen Sie die Pedale mithilfe eines Schraubenschlüs-
sels an den Pedalhalterungen fest. Achten Sie dabei da-
rauf, dass die Markierungen L (links) und R (rechts) auf
den Pedalen und Halterungen übereinstimmen.
Beachten Sie, dass die Pedale in Fahrtrichtung festgedreht
werden. Das bedeutet:
das rechte Pedal (Rechtsgewinde) wird im
Uhrzeigersinn festgedreht,
das linke Pedal (Linksgewinde) wird entgegengesetzt
des Uhrzeigersinns festgedreht.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vitalmaxx 917FS - Z01504 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vitalmaxx 917FS - Z01504 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info