769323
64
Zoom out
Zoom in
Previous page
1/96
Next page
64 D-307500 PowerMaster 360 Installer's Guide
Option
Instructions
or the button to confirm the test.
TEMP/LIGHT TEST
The control panel reads the temperature and light intensity of the zone.
While testing, all previous temperature and light results from the sensors are cleared. To
display the temperature and light intensity of zones on the control panel, press . After
20 seconds the control panel reads the temperature of the zone. If there is no result the
following message is displayed: Zxx TEMP: No TST. The control panel reads the light
intensity of each zone. The light level indication is dynamic; if a detector has only two light
thresholds the following is displayed on the panel:
For 100% light: LIGHT (**)
For complete darkness: LIGHT ()
If there is no light result the following message is displayed "Zxx LIGHT: No TST".
The display alternates between the temperature, light, sensor number and the sensor
location, as in the following example: Z01 24.5°C > Z01: LIGHT (**) > Z01: Sensor
number > Room location. Repeatedly click the button to review the temperature
and light intensity of each zone.
When the temperature and light of all zones is reviewed, the display reads DEVICE TESTS
END. Press the or the button to confirm the test and then move to the next
step to test the other devices.
TEST ALL DEVICES
You can test all devices in one procedure.
While in TEST ALL DEVICES, press to initiate the test.
The control panel now reads NOT TESTED NNN. N indicates the number of enrolled devices
in the control panel that have not been tested. This number automatically drops one count for
every tested device.
When the NOT TESTED NNN screen appears, walk throughout the site to test the detectors /
sensors or press any key of the selected handheld device to initiate the test.
After a device has been activated, the control panel reads Zxx IS ACTIVATED and the N
indicator drops one count.
Pressing during the testing process will display details of each device that has not yet
been tested. The control panel reads the device number, followed by the device type (for
example, Contact Sensor, Motion Sensor or Keyfob) and followed by the device location. At
this stage, pressing any one of the following keys will open the following options:
1. Press to view details of the next untested device.
2. Press to exit the test process.
During testing, you can also check the signal strength indication of each device according to
the number of LED blinks of the device, (for further details, refer to the device Installation
Instructions).
After all devices have been tested, the control panel reads DEVICE TESTS END.
TEST ONE DEVICE
CONTACT SENSORS
MOTION SENSORS
GLASSBREAK SENS.
SHOCK SENSORS
Select a specific device group you require to test, for example, Motion Sensors.
Press to enter the TEST ONE DEVICE sub menu and use to scroll through the
device families. Press to enter the < device family > sub menu. For example: MOTION
SENSORS.
The following screens will appear: Xxx:<device name> <location>
Where Xxx indicates the device number.
If there is no device, the following screen will appear: NO EXISTING DEV.
Press to test the selected device. The following screen will appear: Z01 ACTIVATE
NOW.
Walk throughout the site to test the detectors / sensors or press any key of the selected
handheld device to initiate the test.
During testing, you can also check the signal strength indication of each device, (for further
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Visonic Powermaster-360 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Visonic Powermaster-360 in the language / languages: English as an attachment in your email.

The manual is 2.8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info