580332

Visonic PowerMaster-10-30 G2 Version 18 Manual

43
Zoom out
Zoom in
Previous page
1/74
Next page
MENUS AND FUNCTIONS
42 D-304829 PowerMaster-10/30 G2 User's Guide
14
The display shows the currently selected option (indicated by a
symbol), for example, "
disable report
".
Using the or buttons you can now select the events you wish to be reported to MMS
telephones numbers according to the options provided in the tables below:
Event Group Option Events to be reported
alarms+alrt Alarm and alert messages
alarm Alarm messages
alert Alert messages
disable report No message will be reported
15
You can now, select other options, end this session – (see section A.1 and section A.2), or quit
programming (see section A.3).
B.13 Enabling / Disabling the Squawk Option
The PowerMaster system (and its wireless sirens) can be set to produce a short "Squawk" of audible feedback
to assist you when you use your keyfob to arm (1 beep) and disarm (2 beeps) the PowerMaster system
(operates in a similar manner to a car alarm).
♦ Here you can enable / disable the Squawk.
Carefully read the section titled "Additional Information" according to the indicated references
1
etc – see
table at end of this section.
1.
SQUAWK
Enter the [USER SETTINGS] menu, select the [
SQUAWK
] option and press
.
1
Squawk on
The display shows the currently selected setting.
2
2.
or
Click the or button until the display reads the desired
setting, for example, "Squawk OFF" and press the button to confirm.
Squawk OFF
3.
Squawk OFF
A "Happy Tune"
☺
sounds. The display confirms the saved setting, and
then returns to the User Settings menu, step 1.
3, 4
☺
Return to step 1
Additional Information (section B.13)
1
For detailed instructions on how to select User Settings – refer to sections A.1 and A.2.
2
a. The display shows the currently selected setting (indicated by a
symbol), for example, [
Squawk ON
].
b. You can now enable (ON) or disable (OFF) the Squawk option using the or button.
3
The
symbol now appears next to the new selected option.
4
You can now select another option in the User Settings menu (see section A.1 and section A.2), or quit
programming (see section A.3).
B.14 Programming the Scheduler
The PowerMaster system includes a PGM output that can be used to open and close an electrically-controlled
gate, or to control a preferred electrical device via keyfobs (refer to "Using keyfob transmitters" in Chapter 2) or
according to a programmable weekly time schedule.
♦ Here you can schedule the PGM output for up to 4 different ON/OFF time activations per any desired day or
days of the week. In addition, you can schedule a "Daily" schedule that applies to every day of the week. It is
recommended to complete the Scheduler table (placed at the end of this section) before programming the
Scheduler.
Carefully read the section titled "Additional Information" according to the indicated references
1
etc – see
table at end of this section.
… 43 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Visonic PowerMaster-10-30 G2 Version 18 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Visonic PowerMaster-10-30 G2 Version 18 in the language / languages: English as an attachment in your email.

The manual is 2,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Visonic PowerMaster-10-30 G2 Version 18

Visonic PowerMaster-10-30 G2 Version 18 Installation Guide - Dutch - 112 pages

Visonic PowerMaster-10-30 G2 Version 18 User Manual - Dutch - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info