727355
4
Zoom out
Zoom in
Previous page
1/64
Next page
KP-241 PowerG wireless portable keypad
4
D-307871 KP-241 PG2 Quick Start Guide
General indications
The following table describes the meaning of LED indications that occur during
general use of the keypad:
Table 3. General LED indications
LED
Red
Green with success tune
Red with failure tune
Arming indications
If the system is not ready to arm, or has a trouble or alarm condition, the Status
button flashes for a few seconds. See the
Status requests
section for information on
how to retrieve status information from the control panel.
Status requests
Press the Status button to request the status of your system
The LED blinks red once to indicate the status request, and then the Arm Away, Arm
Home, or Disarm button lights for a few seconds to indicate the arming status.
Table 4. Status request LED indications
LED
Indication
Green
Ready for arming
Red
Not ready for arming.
This may mean that one or more zones are not secured.
Secure or bypass the zone to arm the system.
Yellow
Trouble or active alarm.
Review and clear the trouble to arm the system.
Yellow blinking
Low battery
Enrolling proximity tags
You can use proximity tags instead of user codes to arm and disarm the system. A
proximity tag can be assigned to each of the user codes 1 to 8.
1 Ensure the system is disarmed.
2 Enter the user settings menu on the control panel. Enter your user code.
3 Select the proximity tags option, and press OK.
4 Select Add new tag and press OK. The display reads ENROLL NOW or ENTR
ID:xxx-xxxx.
5 Press the Arm Away button on the keypad. The Arm Away button blinks.
6 Present the proximity tag to the tag reader area on the keypad within the
timeout period. If the tag enrolls successfully, a success tune sounds and the
display of the control panel reads DEVICE ENROLLED.
7 Optional: To assign the tag to another user, for example, User No. 5, enter 05,
or click the forward button until the display reads T05: Tag (Prox). Press OK to
confirm.
Controlling configured electrical appliances
The keypad allows remote control of electrical appliances connected to the control
panel’s PGM output.
1 Press the PGM activation button.
2 To turn on the device, press the Arm Away button.
3 To turn off the device, press the Disarm button.
4 To toggle the device status, press the Arm Home button.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Visonic KP-241 - PG2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Visonic KP-241 - PG2 in the language / languages: English, German, French, Italian, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 2,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info