698980
9
Zoom out
Zoom in
Previous page
1/46
Next page
HET BEVEILIGDE PAND BEWAKEN
Ellipse+ Gebruikershandleiding 9
2. Het beveiligde pand bewaken
In/uitschakel knoppen
Toets Functie
Inschakelen als niemand thuis is
Inschakelen als er iemand thuis is
De inloopvertraging opheffen bij
inschakeling van (‘AFW. INST.’ of ‘THUIS
INST.’)
Het systeem uitschakelen en alarmen
stoppen
Partitie(s) selecteren
Partitie selectie proces
Belangrijke mededeling: Partitioneren heeft alleen
betrekking op aangeschafte bedieningspanelen die
de partitiefunctie ondersteunen.
Een bepaalde partitie in- of uitschakelen wordt
gedaan met een geautoriseerde gebruikerscode of
proximity tag. Het is niet mogelijk om het
INSTALLATIE MENU te openen als een of meerdere
secties in de THUIS of TOTAAL stand zijn
ingeschakeld.
Voordat u probeert om enige partities in te stellen is
het nodig om eerst onderstaande handelingen uit te
voeren waarmee u de gewenste/toegestane
partitie(s) kunt selecteren met de persoonlijke code
of proximity tag:
DRUK
RESULTAAT DISPLAY
KIES PARTITIE
Enter partition # (1-3)
PARTITIE 1
Opmerking: De “treurige melodie” klinkt als een
partitie wordt geselecteerd waar geen componenten
aan toegewezen zijn.
Gereedmaken voor inschakeling
Voordat er wordt ingeschakeld, controleer of GEREED
(*) / P# RDY (**) verschijnt. Dit betekent dat alle zones
(*) / partities (**) in rust zijn en u het systeem (*) /
partitie (**) naar wens kan inschakelen.
* In een systeem zonder partities
** In een systeem met partities
Als een niet gepartitioneerd systeem niet gereed is
om geactiveed te worden (er tenminste één zone
open is) verschijnt het display ZONES + PROBLEEM
(storing), ZONES + GEHEUGEN (geheugen),
ZONES + BERICHT (bericht) of ZONES +
OVERBRUGD.
Als een gepartitioneerd systeem niet gereed is om
geactiveed te worden (er is tenminste één zone
open) verschijnt het display P1:0 P2:0 P2:0 gevolgd
door ZONES + PROBLEEM (storing), ZONES +
GEHEUGEN (geheugen), ZONES + BERICHT
(bericht) of ZONES + OVERBRUGD.
AIs het systeem niet gereed is om geactiveed te
worden
, klikt u op om de nummers en
namen van alle open zones / partities één voor één te
bekijken of de storing te achterhalen.
Aanbevolen wordt om alle open zone(s) te
herstellen, zodat het systeem “gereed voor
inschakeling”. Als dit niet lukt, raadpleeg u uw
monteur.
BELANGRIJK! Alle inschakel procedures die
hieronder worden beschreven zijn gebaseerd op de
veronderstelling dat Snel inschakelen is geactiveerd
door de installateur. Als ‘Direct’ inschakelen is
uitgeschakeld, vraagt de Ellipse+ Complete naar
elke handeling om de gebruikerscode in te toetsen.
‘TOTAAL’ inschakeling
Als het systeem in de status GEREED is, gaat u als
volgt te werk:
DRUK
RESULTAAT DISPLAY
INSCHAKELING
VERLAAT HET PAND
Verlaat het pand
(Uitloopvertraging)
TOTAAL
INSCHAKELEN indicator continu verlicht
tijdens de ingeschakelde status.
Inschakeling ‘THUIS’
Als alle omtrek zones GEREED zijn en ‘Direct’
inschakeling is toegestaan, gaat u als volgt te werk:
DRUK
RESULTAAT DISPLAY
DEELSCHAKELING
Naar interne zone
verplaatsen
(Uitloopvertraging)
THUIS HH:MM
INSCHAKELEN indicator knippert tijdens de
ingeschakelde status.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Visonic Ellipse plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Visonic Ellipse plus in the language / languages: Dutch as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info