498614
44
Zoom out
Zoom in
Previous page
1/48
Next page
Problem Solution
The TV can not be turn ON.
Check if the AC adapter is securely connected by plug it in to the TV and plug it
in to the wall socket. Switch on the TV, the LED light on the front panel will turn
blue; and then press power on the remote control, the LED light will be off, now
you can see the picture on the screen. Plug another electrical device (like a radio)
to the power outlet to verify that the outlet is supplying the proper voltage.
If the screen is blue.
Blank screen appear when
the power is on.
Check your input connections.
Make sure the video cable supplied with the LCD display is tightly secured
to the video output port on the back of the computer. If the other end of the
video cable is not attached permanently to the LCD display, tightly secure it
to the LCD display.
Adjust brightness and contrast.
If you are using a Macintosh older than G3, you will need a Macintosh adapter.
Check Source settings.
Wrong or abnormal colors appear.
If any colors (red, green, or blue) are missing, check the video cable to make
sure it is securely connected. Loose or broken pins in the cable connector
could cause an improper connection.
Connect the LCD display to another computer.
Control buttons do not work.
Press only one button at a time.
Remote Control does not work.
Make sure batteries are inserted correctly.
Batteries could be weak.
There appears to be image quality
issues.
TV: For best image quality,"Standard Definition" TV should be viewed as 4:3
You cannot see a picture. Make sure that the power cord is plugged into a grounded electrical outlet.
Make sure that the power button is turned on.
Make sure that the selected input source is connected to a working input source.
You see a distorted picture or
hear unusual sound.
You may be getting interference from electrical appliances, cars, motorcycles, or
fluorescent lights, Try moving your LCD TV to another location.
The picture has abnormal patterns. Make sure that the input source cable is attached securely and correctly to the
back of your LCD TV.
Make sure that the video input source is within the range of your LCD TV.
Compare the video input source's specifications with your LCD TV specifications.
The display image does not cover
the entire screen.
If you are using VGA mode, make sure that H Size and V Position in the OSD are
set correctly.
If you are using TV,AV,S-Video or component (Analog HD) with 480i input, use
the SCREEN button on the remote control to scroll through various screen modes.
You can see a picture but you
cannot hear sound.
Make sure that the volume is not turned down.
Make sure that the sound is not muted.
Make sure that your audio input source cables are connected securely and currectly
The LCD TV has pixels that are
always bright, dark, or colored.
Your LCD TV is manufactured using an extremely high level of precision technology.
However, sometimes some pixels of your LCD TV may not display. Pixel defects
within industry specifications are inherent to this type of product and do not
constitute a defective product.
There is no sound on the TV.
Check your audio connection.
Press MUTE on the remote control again, so that MUTE disappears from
the screen.
Check your audio settings, your TV audio may be set to SAP or minimum.
Press the VOL+(Up) key on your remote control.
Check to see if your speakers are turned on or off.
WWW.VISIONQUESTCE.COM
44
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for VISIONQUEST LVQ32HLB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of VISIONQUEST LVQ32HLB in the language / languages: English as an attachment in your email.

The manual is 5,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info