498614
30
Zoom out
Zoom in
Previous page
1/48
Next page
Chapter 3- Setting Up to Watch TV
1.Connecting the Power Cable
Connect the power cord to the power cord connector on the back of your LCD TV, and then plug the power
cord into an AC wall socket.
2.Connect Audio and Video Cables to the LCD TV
3.Turning Power On
Once all the components are connected, press the Power button on the front of the TV, or press the Power
(Red) button on the remote control.
4.Select Input Source
Select the Input Source for your LCD TV by pressing the INPUT button on the front of the LCD TV or using
the INPUT button on the remote control. Pressing this button will cycle you through the following
options:TV,Composite1,Composite2, S-Video, Component1, Component2, VGA, HDMI1, HDMI2.
5.Using regular TV with an Air or Cable
If connecting to Antenna or cable source for the TV input, you will need to select the appropriate source
within the On -Screen Display(OSD) menu and Channel Scan for the available TV channels.
Please follow the instructions below:
a. Select the TV input by pressing the INPUT button on the front of the TV or using the INPUT button on the
remote control, or directly by pressing the TV button on the remote control.
b. Press the MENU button on the remote control to show the OSD menu.
c. Press the button on the remote control to highlight the TV menu.
3.1 - Basic LCD TV Start Up
Note: If you do not see this option within the OSD, you might have selected the wrong input in the previous
steps and you will need to repeat step 4(above) to select another Input Source.
WWW.VISIONQUESTCE.COM
30
d. Press button to highlight Tuner mode. Use the or button
to select either Antenna or Cable.
e. Once selected , press the button once more to highlight
Auto Scan to scan the available channels.
Use the ENTER button to start the Searching.
Note: This will take some time to complete.
f. Press the EXIT button to exit the OSD.
Tuner Mode
Auto Scan
Range Scan
Channel Skip
Audio Language
Location Code
Antenna
English
TV
ENTER Enter Select EXIT Exit
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for VISIONQUEST LVQ32HLB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of VISIONQUEST LVQ32HLB in the language / languages: English as an attachment in your email.

The manual is 5,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info