498615
27
Zoom out
Zoom in
Previous page
1/29
Next page
This LCD TV has pre-adjusted using factory standard VGA timings. Due to the output timing
differences among various VGA cards in the market,users may initially experience an
unstable or unclear display whenever a new display mode or new VGA card is selected.
PART I (PC)
TROUBLESHOOTING GUIDE
This LCD TV Supports Multiple VGA Modes.
Refer to the Standard Timing Table for a listing of modes supported by this LCD TV.
ATTENTION
The picture is unclear and unstable,please perform the following steps:
1.Enter PC to "Shut Down Windows "status while you're in MS-WINDOWS environment.
2.Check the screen to see if there are any black vertical stripes appear. If so ,use the "Clock"
function in OSD menu and adjust(by toggling numbers )until those bars disappear.
3.Move to "Phase "function in OSD menu again and adjust the TV screen to its most clear
display.
4.Click "No" on "Shut Down Windows" and back to the normal PC operating environment.
If there's no picture on the LCD TV, please perform the following steps:
1.Make sure the power indicator on the LCD TV is ON, all connections are secured, and the
system is running on the correct timing .
2.Turn off the LCD TV and then turn it back on again. If there is still no picture, press the
Adjustment Control button several times.
3. If step 2 doesn't work, connect your PC system to another external CRT. If your PC system
Functions properly with a CRT TV but it does not function with the LCD TV, the output timing
of the VGA card may be out of the LCD's synchronous range. Please change to an alternative
mode listed in the Standard Timing Table or replace the VGA card, and then repeat steps 1
and 2.
If you have chosen an output timing that is outside of the LCD TV's synchronous range
(Horizontal:24~61KHz and Vertical: 56~75Hz), the OSD will display a "Out of Range"
message, Choose a mode that is supported by your LCD TV. Also, if the signal cable is not
connected to LCD TV at all or properly, the TV screen will display a message "No Input
Signal".
-25-
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for VISIONQUEST LVQ-2001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of VISIONQUEST LVQ-2001 in the language / languages: English as an attachment in your email.

The manual is 2,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info