817675
19
Zoom out
Zoom in
Previous page
1/44
Next page
ENGLISH
EN
19
basis for medical treatment.
RPM Revolutions per minute.
WATT Displays the wattage.
SCAN The different values are displayed alternately. Jumps
every 6 seconds.
LENGTH WEIGHT KPH RPM DIST CAL WATT PULSE
CM KG KM/H R/MIN KM KCAL WBPM


Press "START" or press "ENTER" in setting mode to start the
programme.
In setting mode, press "ENTER" to set one of the following
values: TIME, DISTANCE, CALORIE, AGE. The selected value
flashes.
Press "UP" or "DOWN" to adjust a value up or down. Press
"ENTER" to move to the next item.
When all values are set, the screen automatically exits the
settings and starts the programme. Alternatively, "START" can
be pressed to start the programme.
The resistance level can be adjusted at any time during the
programme by pressing "UP" or "DOWN".
When one of the settings is set, the corresponding value is
counted down. If this value is at 0, a sound will go off.
Press "STOP" to stop the programme.

Press "UP" or "DOWN" to select a specific function.
Press "START" to start the programme or press "ENTER" to enter
the setting mode.
In setting mode, press "ENTER" to set one of the following
values: TIME, DISTANCE, CALORIE, AGE. The selected value
flashes.
Press "UP" or "DOWN" to adjust a value up or down and press
"ENTER" to move to the next item.
When all values are set, the screen automatically exits the
settings and starts the programme. Alternatively, "START" can
be pressed to start the programme.
The resistance level is automatically adjusted to the programme
level. During training, it can be adjusted manually by pressing
"UP" or DOWN".
When one of the settings is set, the corresponding value is
The hand sensors are not working properly: Wash your hands, dry
them well and test the hand sensors again. If this does not solve the
problem, check the handlebar cables for damage and ensure that they
are properly connected to the connector. If this still does not correct
the problem, replace the handlebar.
Console does not work: If there is no signal, check that the cable is
correctly connected.
CONSO
Druk op de “-” toets om de waarde van de geselecteerde
functie te verlagen. Druk tijdens een training op de "-" toets om
de weerstand te verlagen.
START/STOP Start or stop the training.
ENTER Press the "ENTER" button to confirm settings or switch
on from WATT to RPM and back.
RECOVERY Heart rate Recovery test.
RESET Press the "RESET" button to erase all values. User-defined
U1-U4, WATT and PULSE are not cleared.
  Press the "-" key to decrease the value of the selected
function. During a workout, press the "-" key to decrease the
resistance.
Press the "+" key to increase the value of the selected
function. During a workout, press the "+" key to increase the
§resistance.
DISPLAY-ALT Press the "DISPLAY-ALT" key to fix a selected value.
Functions
TIME The time measured from the start of the exercise is
displayed.
SPEED The current speed during the exercise is displayed.
DISTANCE The distance covered during the exercise is displayed.
CALORIES The number of calories burned during the exercise
is displayed.
PULSE When placing the hands on two contact surfaces, the
heart rate can be measured. After 3 seconds, the most accurate
heart rate is displayed. This measurement cannot be taken as a
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for VirtuFit VFELEF - Easy Fit Crosstrainer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of VirtuFit VFELEF - Easy Fit Crosstrainer in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2.9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info