701702

Vintage Vinyl VV-SV-TT-xxV2 Manual

4
Zoom out
Zoom in
Previous page
1/28
Next page
• 45 RPM adapter holder – Holds the included 45 RPM adapter. When not using the
adapter, please place it in this holder
• Tone arm – Lift lever
• Auto Stop & ON/OFF control
• 33 / 45 / 78 RPM switch – This switch controls the RPM of the turntable platter.
• Power ON/OFF and volume control.
• Headphone 3.5 mm stereo port
• Tone arm – The turntable comes with a ready to use pre-balanced tone arm and
cartridge. The tone arm can be raised and lowered by hand, or by using the raise / lower
lever . Please note: the tone arm needs to be moved away from resting position (on
the arm clip) for the turntable motor to activate when Auto Stop is ON.
• Speakers
• Line in port (3.5 mm) – For connecting your Smartphone, Tablet, MP3 or other Digital
Audio Player
• Line out port (RCA) Right Channel – Use to connect to external amplier or speakers
• Line out port (RCA) Left Channel – Use to connect to external amplier or speakers
• Power Adaptor connection port
LISTENING TO A RECORD
• Lift the buckle on the front of the turntable and open the lid.
• Turn the power & volume control knob clockwise.
• Place a record on the turntable platter and select the desired speed (33/45/78) according
to the record. NOTE: when playing a 45 rpm record, use the included 45 rpm adapter .
• Open the tone arm clip to release the tone arm . Push the lift lever backward to raise
the tone arm and gently move the tone arm to the desired position over the record. The
turntable will begin to spin when the arm is moved toward the record. Push the lift lever
forward lower the tone arm slowly onto the desired position on the record to begin playing the
record. Please note: The record will begin to spin only when the tone arm is moved over to
the record if the AUTO STOP is turned ON.
• If the AUTO STOP ON/OFF Switch is turned ON, the record will stop automatically when
nished (For some vinyl records, it will stop when it the record did not come to the end, or it
will not stop when it comes to the end). This due to the position of the tone arm. If Auto Stop
Control is turned OFF, the record will NOT stop automatically when nished.
INITIAL SETUP
• Make sure that the mains voltage is compatible with the operation voltage of the Power
Adapter.
• Connect the Power Adapter in the wall socket.
• Connect the DC plug for Power into the Power Adapter connection port
10
7
4
2
5
3
11
12
9 10 11 12
1
2
3
2
4
5
6
7
8
9
12
1
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vintage Vinyl VV-SV-TT-xxV2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vintage Vinyl VV-SV-TT-xxV2 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info