744772
17
Zoom out
Zoom in
Previous page
1/20
Next page
17
G
5. Troubleshooting
Problem Possible reason Possible solution
Robot is not running Battery is too low.
Dust bin is not inserted
(correctly).
Recharge the battery for 5
hours.
Insert the dust bin.
Low or no suction Dust bin is full.
Filter is blocked with dirt.
Suction port is blocked.
Filter is missing.
Empty dust bin.
Clean the filter with brush.
Clear the port with brush.
Put filter back in place.
Abnormal movement Wheels are dirty.
Cliff sensors are dirty.
Clean wheels.
Clean cliff sensors.
Error sound is occuring
In combination with shown
on the display: low power.
Robot is stuck.
Wheels are blocked.
Recharge the battery for 5
hours.
Put the robot in a safe place or
clean its bottom sensors.
Clean the wheels, including
the front wheel.
Low battery after charging or no
charging possible
Main on/off switch at the robot
is off.
Charger or battery is defective.
Turn on main switch / “on/off
to enable charging.
Contact the Vileda service
(address see last page).
Display shows the error code
A / U / B / F”
Suction passage blocked. Clean suction passage with
the main brush.
Display shows the error code
A / U / B / N"
Dust bin not placed in position
or robot without dust bin.
Put back dust bin and place it
in position.
Display shows the error code
“E / R / R / O"
Main switch is switched off, no
charging possible.
Switch the main switch on and
continue charging the robot.
Display shows the error code
“E / various / various / various"
Device off the ground or sensors
jammed or dirty.
Put robot on solid ground.
Check sensitivity of the front
bumper.
Clean bottom anti-drop
sensor lens.
Clean front bumper sensor
lens.
Display shows the error code
“L / various / various / various"
Motors overloaded or jammed. Check if fan opening is free
and clean dust bin.
Check if wheels or brush unit
is stuck or wired by obstacles.
If above described solutions do not work, please try switching off VR 302, switch it on and check again.
For further help, technical advice, or to order spare or replacement parts contact Vileda (address see
last page).
17


Need help? Post your question in this forum.

Forumrules
1

Forum

vileda-vr-302

Reset search

  • vileda vr302 robot vacumn stopping after a minute showing error code 77 Submitted on 27-3-2023 at 15:36

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vileda VR-302 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vileda VR-302 in the language / languages: English as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info