744773
10
Zoom out
Zoom in
Previous page
1/14
Next page
10
G
SENSORS:
Dirt and dust can accumulate on the cliff sensor lens and might affect the
efficiency of sensing heights.
To ensure the best efficiency, gently clean the sensors periodically with a dry
cloth or with the provided Cleaning Brush.
BRUSH BAR AND CENTRE BRUSH:
Use the hard plastic end of the Cleaning Brush and pull out any hair, strings or
fibres tangled around the Brush Bar (check out video on Vileda website) and
the bristles to clean the brush lip.
DEEP CLEANING THE ROBOT
Ensure the power switch is in OFF position and not connected to an electrical outlet.
SUCTION PORT:
Dust, lint or hair can accumulate and close the vacuum port which may affect the air flow and reduce suction
efficiency.
To ensure maximum suction power, the port should be checked and cleared of any restrictions periodically with
the included Cleaning Brush.
BRUSH BAR:
Unlock the release knob using a coin or screw
driver, turn counter clockwise.
Remove the brush bar cover
Remove all the hair, strings or fibres wrapped
around the brush bar. Using a pair of scissors
carefully cut along the groove to remove
anything wound around the brush bar. Avoid
damaging or cutting the bristles.
After cleaning, put back the brush bar inside
Robot, close the brush bar cover and turn the
release knob clockwise to secure it.
WHEELS:
Turn the Robot upside down
Remove the wheel cover screw and lift it up away
from the wheel
Grab rubber wheel and lift the wheel assembly
carefully out of the housing
Clean hair and dust out of the wheel axle. Use the
cleaning brush to remove dirt out of the wheel
tread.
After cleaning, insert the wheel assembly back
inside and screw the wheel cover back in place.
CENTRE WHEEL:
Turn the device upside down.
Lever out the wheel and pull it out carefully from the housing.
Remove hair and dust from the wheel axle. Remove dirt and impurities with the
cleaning brush.
After cleaning the wheel, insert it back and press it in.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vileda VR-101 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vileda VR-101 in the language / languages: English as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vileda VR-101

Vileda VR-101 User Manual - English, German, Dutch, French, Italian, Portuguese, Spanish - 108 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info