14
CleaninG vaCUUm inlet Cover
2
2
1
CLEANING VACUUM INLET COVER
1 Turn off the power switch and turn the robot
upside down.
2 Remove vacuum inlet cover as shown in the
illustration.
3 Clean vacuum inlet cover and the fan mechanism
to ensure good ventilation.
4 Reinsert the vacuum inlet cover by guiding the
hinge tabs back into the holes carefully.
REPLACING SIDE BRUSH
1 Use a cross-head screwdriver to remove side brush cover.
2 Insert new side brush and put back the cover.
3 Tighten the screws.
For further help, technical advice, or to order spare or replacement parts
please contact Vileda in the UK on 08457697356.