667338
41
Zoom out
Zoom in
Previous page
1/290
Next page
ENES
39
PTEL
0478 192 9807 C - EN
Press V-belt tensioner lever (1) forwards
and hold in place. Engage retainer (2) at
the frame as shown. Make sure that the V-
belt tensioner lever is fixed in the front
position.
Detaching the mowing deck at the rear:
Pull out cotter pin (1) upwards.
Lift up the mowing deck slightly and hold.
Push mounting (2) outwards and remove
retaining pin (3) from the mounting.
Repeat this procedure on the other
side.
Carefully and slowly set down the
mowing deck.
Detaching the V-belt:
Press retaining plate (1) forwards and hold
in place. Pull V-belt (2) forwards and
detach.
Releasing the V-belt from the tension
roller (MT 5112 Z, MT 6112 C,
MT 6112 ZL, MT 6127 ZL):
Push locking pin (1) approx. 0,5 cm
upwards and hold. Detach V-belt (2) from
tension roller (3).
Detaching the mowing deck at the front
(MT 5097, MT 5097 C, MT 5097 Z):
Risk of injury!
The cutting height adjustment lever
is under tension when the mowing
deck is detached at the rear.
Therefore carefully set the highest
cutting level immediately after
detaching the mowing deck.
After the V-belt is detached, push
the locking pin down again as far as
it will go until it engages in the
cover. After engagement, check
that the locking pin is securely
seated.
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viking MT 6127ZL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viking MT 6127ZL in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 24,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Viking MT 6127ZL

Viking MT 6127ZL User Manual - German, Dutch, French, Italian - 284 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info