Manual Viking MT 6127ZL (page 37 of 290) (English, Portuguese, Spanish)

667338

Zoom out

Zoom in

1/290

ENES

PTEL

0478 192 9807 C - EN

● Drive the ride-on mower onto the lawn.

Do not engage the mowing deck in tall

grass or when set to the lowest cutting

level. Only engage the mowing deck

when the machine is already on the

area to be worked.

● Forwards mowing:

Select the forward driving direction

(Ö 8.9), then engage the mowing deck

by pressing the mowing deck switch or

mowing deck button. (Ö 8.5), (Ö 8.6)

Reverse mowing:

Select the reverse driving direction

(Ö 8.9) and briefly press the reverse

mowing safety switch (Ö 8.8) once,

then engage the mowing deck by

pressing the mowing deck switch or

mowing deck button within 6 seconds.

(Ö 8.5), (Ö 8.6)

During mowing:

● Set the throttle lever to the MAX

position. (Ö 8.2), (Ö 8.3)

● Always adapt the driving speed to the

grass height/cutting level.

A low driving speed should be selected

when mowing tall grass/at a low cutting

level.

Changing the driving direction with the

mowing deck engaged:

● For reverse mowing, briefly press the

reverse mowing safety switch once

within the designated time window

(5 seconds/1 second after switching).

(Ö 8.8)

● Bring the machine to a standstill on the

lawn and set the required driving

direction using the driving direction

selector lever. (Ö 8.9)

● Continue mowing.

Disengage the mowing deck in the

following sequence:

● Drive onto an area of grass which has

already been mown or select the

highest cutting level. (Ö 8.15)

● Disengage the mowing deck by

pressing the mowing deck switch or

mowing deck button. (Ö 8.5), (Ö 8.6)

13.8 Programming automatic

disengagement of the mowing deck

The electromagnetic blade clutch

can be programmed so that the

mowing deck is automatically

disengaged when the grass catcher box is

full. This enhances operating convenience

as blockage of the discharge chute is

prevented.

● Stop the engine. (Ö 13.3)

● Turn the ignition key to the "ignition on"

position. (Ö 8.1)

● Wait for the electronics self-diagnosis –

do not press any buttons.

Activating automatic disengagement:

● Press the reverse mowing safety switch

and actuate the drive pedal at the same

time for 5 seconds.

A short beep signals that automatic

operation is switched on.

● The current setting is permanently

saved.

Deactivating automatic

disengagement:

● Press the reverse mowing safety switch

and actuate the drive pedal at the same

time for 5 seconds.

Three beeps in quick succession signal

that automatic operation is switched off.

● The current setting is permanently

saved.

Programming automatic

disengagement using the Mode button

(only with MT 6112 C, MT 6112 ZL,

MT 6127 ZL):

● Keep the mowing deck button pressed

and press the Mode button at the same

time – automatic disengagement is

switched on or off using the Mode

button (ON or OFF appears on the

display).

● The current setting is permanently

saved.

Checking the programming (only with

MT 6112 C, MT 6112 ZL, MT 6127 ZL):

● Press and hold the mowing deck

button. The mowing deck active symbol

and the text ON or OFF appear on the

display.

ON – The mowing deck is automatically

disengaged when the grass catcher box

is full.

OFF – The mowing deck is not

automatically disengaged when the

grass catcher box is full.

A permanent continuous tone

signals that the grass catcher box is

full. (Ö 13.9)

Risk of injury!

After disengaging the mowing deck,

beware of the mowing blade

running on for up to 7 seconds

before coming to a standstill.

(Ö 12.)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Viking MT 6127ZL in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 24,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Viking MT 6127ZL

Viking MT 6127ZL User Manual - German, Dutch, French, Italian - 284 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Viking MT 6127ZL Manual

Product: