667337

Viking MT 6112ZL Manual

25
Zoom out
Zoom in
Previous page
1/290
Next page
ENES
23
PTEL
0478 192 9807 C - EN
8.9 Driving direction selector lever
The driving direction is selected
using the driving direction
selector lever.
The ride-on mower drives in the
selected direction after the drive pedal is
actuated – actuating the driving direction
selector lever alone does not set the
machine in motion.
Selecting the driving direction:
Forward driving direction:
Move the driving direction selector
lever (1) to the front position.
Reverse driving direction:
Move the driving direction selector
lever (1) to the rear position.
8.10 Steering wheel
Turning the steering wheel (1) to the left L
or right R changes the driving direction of
the machine.
The further the steering wheel (1) is
turned, the smaller the turning radius.
8.11 Driver's seat adjustment
The driver's seat can be adjusted
to seven notched positions.
● Stop the engine. (Ö 13.3)
● Sit on the driver's seat and put your
right hand on the steering wheel.
1 With your left hand, lift and hold the
driver's seat adjustment lever (1).
2 Move the driver's seat (2) to the
required position. Then release the driver's
seat adjustment lever again and allow it to
engage.
8.12 Drive pedal
The driving speed can be
continuously regulated via the
drive pedal.
For safety reasons, the driving
direction selector lever is locked
when the drive pedal is pressed.
Therefore release the drive pedal
before actuating the driving
direction selector lever.
Warning:
Always hold the steering wheel
firmly in both hands when driving.
Note
Before actuating the drive pedal,
ensure that the correct driving
direction is selected at the driving
direction selector lever.
If the parking brake is engaged or
the brake pedal is pressed, the
drive pedal cannot be actuated.
… 25 …


Need help? Post your question in this forum.

Forumrules
1

Forum

viking-mt-6112zl

Reset search

  • MT6112C
    I get continuity when i connect M(agneto) and G(round) terminals in Stop position on ignition key, so great. But in the block that connects to it, the slot is empty, and te diagram shows LASBYM without any wire going to M. Could you explain please? Submitted on 16-5-2023 at 16:49

    Reply Report abuse

  • how to remove a flat battery from vikking ride on
    Submitted on 2-12-2022 at 16:14

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viking MT 6112ZL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viking MT 6112ZL in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 24,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Viking MT 6112ZL

Viking MT 6112ZL User Manual - German, Dutch, French, Italian - 284 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info