Manual Viking MT 6112C (page 13 of 290) (English, Portuguese, Spanish)

667336

Zoom out

Zoom in

1/290

ENES

PTEL

0478 192 9807 C - EN

If petrol is spilled, the engine must only be

started after the petrol-contaminated area

has been cleaned. All attempts at starting

must be avoided until the petrol fumes

have dispersed (wipe dry).

Any spilt fuel must be wiped up

immediately.

Clothing must be changed if it comes into

contact with petrol.

Following each refilling of the tank, the fuel

tank cap must be properly screwed on and

tightened. The machine must not be

operated without the original tank cap.

For safety reasons, the fuel line, fuel tank,

tank cap and connections must be

checked regularly for damage, ageing

(brittleness), firm seating and leaks.

Replace if necessary (consult a specialist

dealer; VIKING recommends VIKING

specialist dealers).

If it is necessary to drain the tank, this must

be done out of doors.

Never use beverage bottles or similar for

disposal or storage of fuels and lubricants.

Persons, particularly children, could be

tempted to drink out of them.

Never store the machine with petrol in the

tank inside a building. The resulting petrol

fumes could come into contact with naked

flames or sparks and could be ignited.

Do not leave the machine and the fuel tank

close to heating systems, radiant heaters,

welding equipment and other sources of

heat. Explosive hazard!

4.5 Clothing and equipment

Always wear sturdy footwear

with high-grip soles when

working. Never work barefoot

or, for example, in sandals.

Always wear long trousers and tight-fitting

clothing when operating the machine.

Never wear loose clothes which may

become caught on moving parts (control

levers) – do not wear jewellery, ties or

scarves.

Also always wear sturdy gloves

and tie up and secure long hair

(headscarf, cap, etc.) when

performing maintenance and

cleaning work or when transporting the

machine.

Wear suitable safety glasses

when sharpening the mowing

blade.

4.6 Before operation

Make sure that only persons who are

familiar with the instruction manual are

permitted to use the machine.

Check the fuel system (particularly visible

parts such as e.g. tank, tank cap, hose

connections) before operating the

machine. In the event of any leaks or

damage, do not start the engine – fire

hazard!

Have the machine repaired by a specialist

dealer prior to operation.

Observe the local regulations regarding

permitted operating times for gardening

power tools with combustion engines or

electric motors.

Carefully inspect the complete area on

which the machine is to be used and

remove any stones, sticks, wires, bones

and other foreign objects which could be

thrown up by the machine. Obstacles (e.g.

tree stumps, roots) can be easily

overlooked in long grass.

For this reason, mark all foreign objects

(obstacles) which are hidden in the lawn

and cannot be removed before

commencing work with the machine.

Defective and all other worn or damaged

parts must be removed before using the

machine. Replace any illegible or

damaged danger signs and warnings on

the machine. Your VIKING specialist has a

supply of replacement stickers and all the

other spare parts.

Never use the machine with damaged

safety devices or with safety devices

removed.

The braking function must be checked

before each use. (Ö 13.5)

Before each use, check whether:

– the cutting tool and the entire cutting

unit (mowing blade, blade clutch, blade

brake, retaining pin, mowing deck

housing) are in good condition.

Particularly check for secure fastening,

damage and wear.

– the tank cap is securely attached.

– the tank and fuel-carrying parts, as well

as the tank cap are in good condition.

– the safety devices are in good condition

and function correctly.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Viking MT 6112C in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 24,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Viking MT 6112C

Viking MT 6112C User Manual - German, Dutch, French, Italian - 284 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Viking MT 6112C Manual

Product: