667335

Viking MT 5112Z Manual

21
Zoom out
Zoom in
Previous page
1/290
Next page
ENES
19
PTEL
0478 192 9807 C - EN
● Check engine oil filling level. (Ö 15.8)
● Fill fuel tank. (Ö 13.1)
● Open fuel cock. (Ö 15.7)
● Optimise tyre pressure. (Ö 15.16)
8.1 Ignition lock with light switch
The ignition lock serves to start
and stop the engine and to switch
the headlamps on and off.
Insert ignition key (1) in ignition lock (2).
The following four positions can be
selected by turning the ignition key:
Engine off:
The engine is switched off or will
be stopped. The lights are
switched off and the ignition key can be
removed.
Lights on (operation with
lights):
Running engine:
The lights are switched on and the engine
continues to run.
Engine off:
The lights are switched on.
Ignition on/engine running:
The ignition is switched on and
the lights are switched off.
Following starting, the ignition key returns
automatically to this position and the
engine continues to run.
Start engine:
When all safety-relevant points
for starting are fulfilled and the
ignition key is turned to this
position, the engine starts.
On releasing the ignition key, it returns
automatically to the "engine running"
position.
8.2 Throttle lever with choke function
(MT 5097, MT 5097 C, MT 6112 C)
To start a cold engine, move the throttle
lever on the models MT 5097, MT 5097 C,
MT 6112 C to the choke position.
7. Operations prior to initial
use
Warning!
Prior to all operations on the ride-on
mower, carefully read and observe
the section "For your safety". (Ö 4.)
8. Controls
Avoid damage to the machine.
The ignition key can only be
inserted and removed in the
"engine off" position.
The ignition lock can only be
operated with the appropriate
ignition key – never use a
screwdriver or other such object.
Note
When the engine is stopped, a
signal tone is activated after 20
seconds in the "lights on" and
"ignition on" positions. The acoustic
signal indicates that the battery is
being discharged. To deactivate the
signal tone, turn the ignition key to
the "engine off" position or start the
engine.
Do not use the choke when starting
a warm engine (throttle lever in
MAX position).
Deactivate the choke as soon as
the engine is running.
Never move the throttle lever to the
choke position when the engine is
running.
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viking MT 5112Z at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viking MT 5112Z in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 24,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Viking MT 5112Z

Viking MT 5112Z User Manual - German, Dutch, French, Italian - 284 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info