667334
15
Zoom out
Zoom in
Previous page
1/290
Next page
ENES
13
PTEL
0478 192 9807 C - EN
Before reversing, always check the area
behind the ride-on mower and, if present,
disengage the attachment. Never mow in
reverse, if it is not absolutely necessary.
When mowing in reverse, take particular
care and before beginning to mow,
thoroughly check the entire area behind
the ride-on mower.
When working together in a group, always
inform the others in advance of what you
intend to do. Maintain a safety distance!
The vehicle speed must be reduced before
each change of direction, so that the user
retains control of the machine at all times
and also that the ride-on mower cannot tip
over.
When operating near to roads and when
crossing roads, other road users must be
taken into account.
Take particular care when mowing near
roads, cycle paths and footpaths. Objects
which are thrown up by the mower can
cause severe injury and damage.
Only empty the grass catcher box from the
driver's seat.
Before emptying the grass catcher box,
always disengage the mowing blades and
wait until they have come to a standstill.
When operating the ride-on mower with
attachments, always follow the
instructions and safety regulations
supplied with the attachments.
Switch off the drive, stop the engine and
wait until the mowing blades have come to
a complete standstill, engage the parking
brake and remove the ignition key:
When leaving or transporting the
machine.
Before remedying blockages, including
those in the discharge chute.
Before checking, cleaning or working
on the ride-on mower.
If the mowing blades have hit an
obstacle.
Inspect the machine and the cutting tool
for damage and have any necessary
repairs performed before re-starting.
Additionally check the installation
position of the mowing blades on the
models MT 5112 Z, MT 6112 C,
MT 6112 ZL, MT 6127 ZL – the mowing
deck must not be engaged if the angle
of the blades relative to each other is
not as specified in the chapter "Mowing
blade maintenance". (Ö 15.13)
If the machine begins to vibrate
excessively. It must be checked
immediately.
Stop the engine and wait until the mowing
blades have come to a complete standstill:
Before filling with fuel.
Before removing the grass catcher box.
Before opening the engine hood.
Driving with cruise control:
Activating cruise control in the wet or
under adverse ground conditions as well
as when pulling loads increases the
accident risk.
When cruise control is switched off, the
ride-on mower brakes abruptly.
Cruise control is an aid that provides
assistance when driving. The
responsibility for the driving speed and for
timely braking always lies with the user.
Cruise control does not react to obstacles
or to altered ground conditions. If an
obstacle cannot be avoided at the set
driving speed, cruise control must be
switched off.
Due to the increased risk of accident,
cruise control must not be used:
In situations which do not permit driving
at constant speed (e.g. adverse ground
conditions due to wet conditions or on
slopes).
On slippery surfaces. The wheels may
lose their grip and the vehicle can skid.
If visibility is poor (e.g. due to fog, heavy
rain or at night).
Working on slopes:
Slopes are one of the major causes of
accidents in which control over the ride-on
mower is lost causing it to tip over, which
can result in severe or even fatal injuries.
There is no "safe" slope! Driving on grassy
slopes requires special concentration.
For safety reasons, the machine must not
be used on slopes with an inclination of
more than 10° (17.6 %). Risk of injury!
A slope inclination of 10° corresponds to a
vertical height increase of 17.6 cm for a
100 cm horizontal distance.
In order to ensure an adequate oil supply
for the engine, the information in the
accompanying engine instruction manual
must be additionally observed when using
the machine on slopes.
If you cannot drive up the slope in reverse
or if you have doubts regarding safety, you
should not drive on the slope.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viking MT 5097Z at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viking MT 5097Z in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 24,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Viking MT 5097Z

Viking MT 5097Z User Manual - German, Dutch, French, Italian - 284 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info