Manual Viking MT 5097Z (page 12 of 290) (English, Portuguese, Spanish)

667334

Zoom out

Zoom in

1/290

0478 192 9807 C - EN

been caused by vibrational loads.

Symptoms of this kind principally affect the

fingers, hands or wrists and include

(incomplete list):

– numbness,

– pain,

– muscular weakness,

– skin discolouration,

– unpleasant tingling sensation.

4.2 Training – learning to use the

machine

Make sure that you are familiar with the

controls and operation of the machine. In

particular, the user must know how the

work tools and engine can be stopped

quickly.

The machine must only be used by

persons who have read the instruction

manual and are familiar with operation of

the machine. The user should seek expert

and practical instruction prior to initial

operation. The user must receive

instruction on safe use of the machine

from the vendor or another expert.

During this instruction, the user should be

made aware

– that the utmost care and concentration

are required for working with the

machine.

– that a ride-on mower which is sliding

down a slope cannot be brought under

control by applying the brake.

The main causes for the loss of control

over the ride-on mower include:

– inadequate adhesion of the wheels,

– driving too fast,

– inappropriate braking,

– incorrect use (sport events, etc.),

– inadequate knowledge of the effects

associated with ground conditions,

especially on slopes (see section "For

your safety", "Working on slopes"),

– incorrect attachment of loads and poor

load distribution.

4.3 Transporting the ride-on mower

On account of its own weight, the ride-on

mower can cause severe crush injuries.

Particular care must be taken when

loading or unloading the ride-on mower

onto/from a vehicle or trailer for transport

purposes.

This ride-on mower must not be towed. For

transporting on public roads, a suitable

vehicle or a suitable trailer must be used.

During transport, secure the ride-on

mower to a load floor as described in this

instruction manual. Always engage the

parking brake. (Ö 16.)

Prior to transporting or storage, disengage

the drive to the mowing blade or

attachments.

When transporting the machine, always

observe regional legislation, especially

regarding load security and the transport

of objects on load floors.

Allow the machine, in particular the engine

and muffler, to cool down completely after

loading and before further transport. The

load floor and the area around the muffler

and engine must be kept free of

combustible materials such as straw,

leaves or dry grass residues.

4.4 Refilling the tank – handling petrol

Petrol must only be stored in appropriate,

tested containers (canisters). Always

screw on the fuel tank and canister caps

properly and tightly. Defective caps must

be replaced for safety reasons.

Keep petrol away from sparks,

naked flames, pilot lights, heat

sources, and other ignition

sources. Do not smoke!

Refill the tank out-of-doors and do not

smoke during refilling.

Before refilling the tank, stop the engine

and allow it to cool.

Refilling with petrol must be performed

before the engine is started. When the

engine is running or is hot, the tank cap

must not be removed and the tank must

not be refilled with petrol.

Open the fuel tank cap slowly and

carefully. Wait for pressure compensation

and only then remove the tank cap

completely.

Use a suitable funnel or filling pipe for

refilling the tank, so that no fuel can spill

onto the engine and housing or the lawn.

Do not overfill the fuel tank!

To give the fuel room to expand,

never fill the fuel tank past the

lower edge of the filler neck.

Observe the additional

instructions in the engine

instruction manual.

Danger to life!

Petrol is poisonous and extremely

inflammable.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Viking MT 5097Z in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 24,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Viking MT 5097Z

Viking MT 5097Z User Manual - German, Dutch, French, Italian - 284 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Viking MT 5097Z Manual

Product: