667331

Viking MT 4112SZ Manual

29
Zoom out
Zoom in
Previous page
1/332
Next page
ENNO
27
SVFIDAPL
0478 192 9803 B - EN
11.7 Mowing
The following points must be noted
before engaging the mowing blade:
– No persons, particularly children or
animals must be in the vicinity.
– Carefully inspect the complete area on
which the machine is to be used and
remove all stones, sticks, wire, bones
and other foreign objects.
– Before engaging the mowing deck,
visually inspect to determine whether
the safety devices (V-belt covers,
deflector flap etc.) are properly installed
and are in good condition.
– Only engage the mowing blades at the
maximum engine speed.
– Only engage the mowing blades when
the machine is already on the grass
area to be mown.
– Do not engage the mowing blades in tall
grass or when set to the lowest cutting
level.
Engage the mowing blade in the
following sequence:
● Start the engine. (Ö 11.2)
● Drive the machine onto the lawn.
● Do not engage the mowing deck in tall
grass or when set to the lowest cutting
level. (Ö 8.12)
● Press the mowing deck switch to
engage the mowing deck. (Ö 8.5)
During mowing:
● Always set the throttle lever to the MAX
position when mowing. (Ö 8.2), (Ö 8.3)
● Always adapt the driving speed to the
grass height/cutting level when
mowing.
A low driving speed should be selected
when mowing tall grass / at a low cutting
level. (Ö 8.9)
Disengage the mowing blade in the
following sequence:
● Drive onto an area of grass which has
already been mown or select the
highest mowing deck cutting level.
(Ö 8.12)
● Press the mowing deck button to
disengage the mowing deck. (Ö 8.5)
11.8 Pulling loads
Maximum trailer weight on a level
surface = 250 kg
Maximum trailer weight on a maximum 10°
inclination = 100 kg
Always set the maximum engine
speed for mowing. The mowing
blades are optimised for this speed
and this produces the best cutting
pattern as well as the best cutting
performance.
If the mowing deck is engaged
when driving, the engine speed is
briefly reduced due to the additional
load as the mowing blades start to
rotate. The engine then continues
to run at the selected engine speed.
Should the discharge opening
become blocked or if the engine
speed is reduced during a mowing
operation, a lower driving speed or
a higher cutting level should be
selected.
In order to maintain a well-cut lawn,
the section "Notes on mowing"
should be read and observed
before mowing. (Ö 9.)
Risk of injury:
After disengaging the mowing deck,
beware of the mowing blade
running on for several seconds
before coming to a standstill (max.
5 seconds).
Risk of injury:
Before attaching loads, always
check the braking function.
(Ö 8.10)
The driving characteristics of the
machine are changed when
transporting loads (longer braking
distances, select lower driving
speed when changing direction
etc.). The heavier the load, the
more the driving characteristics are
changed.
Avoid damage to the machine.
The maximum pulled load is
decreased on inclines.
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viking MT 4112SZ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viking MT 4112SZ in the language / languages: English, Danish, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 26,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Viking MT 4112SZ

Viking MT 4112SZ User Manual - German, Dutch, French, Italian, Portuguese, Spanish - 350 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info