667331
28
Zoom out
Zoom in
Previous page
1/332
Next page
0478 192 9803 B - EN
26
Stop the engine in the following
sequence:
Brake the machine to a complete
standstill.
Disengage the mowing deck. (Ö 8.5)
Set the throttle lever to the MIN
position. (Ö 8.2), (Ö 8.3)
Turn the ignition key to the “engine off”
position. The engine is stopped.
Engage the parking brake. (Ö 8.11)
Close the fuel cock if necessary.
(Ö 13.12)
Remove the ignition key and keep in a
place where only authorised persons
can access it.
11.4 Driving
The following points must be noted
before driving:
Always check the braking function
before driving. (Ö 8.10)
Engage the gearbox freewheel
lever. (Ö 8.13)
Bring the machine to a standstill and
only then actuate the driving direction
selector lever.
Forward driving:
Start the engine. (Ö 11.2)
Set driving direction selector lever to
the front position (forward driving
direction). (Ö 8.6)
Disengage the parking brake, if
engaged. (Ö 8.11)
By pressing the drive pedal, the driving
speed is regulated and the machine
moves forward.
Reversing:
Start the engine. (Ö 11.2)
Set driving direction selector lever to
the rear position (reverse driving
direction). (Ö 8.6)
Disengage the parking brake, if
engaged. (Ö 8.11)
By pressing the drive pedal, the driving
speed is regulated and the machine is
set in reverse motion.
11.5 Braking
Reduce driving speed.
Press the brake pedal down evenly until
the machine comes to a standstill.
11.6 Adjusting the cutting height
Brake the machine to a complete
standstill. (Ö 11.5)
Unlock and hold the cutting height
adjustment lever. (Ö 8.12)
The cutting height can be adjusted by
moving the cutting height adjustment
lever upwards or downwards to
7 cutting levels.
Lock the cutting height adjustment
lever. (Ö 8.12)
Cutting level 1:
Cutting height 35 mm
Cutting level 7:
Cutting height 90 mm
Risk of injury:
For safety reasons, the ignition key
must always be removed when
leaving the machine after stopping
the engine. Keep the ignition key
where only authorised persons
have access to it, in order to
prevent use by children or other
persons unfamiliar with the
machine.
Furthermore, the parking brake
must always be engaged before
leaving the machine. (Ö 8.11)
Warning:
A low driving speed must always be
selected on rough terrain.
Before each change of direction,
especially on slopes, the driving
speed must be appropriately
reduced.
In order to ensure optimum cooling
of the gearbox, the driving speed
should only be regulated via the
drive pedal at maximum engine
speed.
Risk of injury:
Before braking, reduce the driving
speed by easing the pressure on
the drive pedal:
If possible, refrain from braking
abruptly at the maximum driving
speed.
Risk of injury:
For safety reasons, only adjust the
cutting height when the machine is
at a standstill.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viking MT 4112SZ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viking MT 4112SZ in the language / languages: English, Danish, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 26,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Viking MT 4112SZ

Viking MT 4112SZ User Manual - German, Dutch, French, Italian, Portuguese, Spanish - 350 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info