667328
50
Zoom out
Zoom in
Previous page
1/332
Next page
0478 192 9803 B - EN
48
The following points must be noted when
transporting:
Before loading, select the highest
cutting level. (Ö 11.6)
If a trailer is used, it must be supported
at the front so that it cannot tilt up due to
the weight of the machine.
Use a suitable lifter or loading ramps for
loading the machine.
Position the loading ramps safely
(observe wheel base of the machine)
and secure.
Ensure an even distribution of the load
on trailers.
After loading, select the lowest cutting
level. (Ö 11.6)
Stop the engine. (Ö 11.3)
Push the machine fully forwards.
Engage the parking brake. (Ö 8.11)
Close the fuel cock. (Ö 13.12)
Secure the machine at the front using
suitable fastening materials (belts,
ropes etc.). Attach the fastening
materials at the front axle for this
purpose.
Place additional wooden wedges (not
included in standard equipment) at the
wheels to prevent unintentional rolling.
Mowing blade MT 4097 S, MT 4097 SX:
6165 702 0100
Mowing blade MT 4112 S, MT 4112 SZ:
6165 702 0110
Blade fastening screw:
9010 345 2431
Spring washer:
0000 702 6600
14. Transport
Risk of injury:
The section "For your safety",
especially subsection "Transporting
the machine" and subsection
"Instructions for safe operation of
the machine", must be carefully
read and observed. (Ö 4.)
When loading the machine onto a
suitable vehicle or a suitable trailer,
it must be ensured that the load is
distributed evenly.
When loading the machine, use
loading ramps which withstand the
weight and are wide enough to be
driven over safely. Select a low
driving speed when driving over the
loading ramps and ensure that the
wheels do not drive over the edges
of the loading ramps, resulting in
the ride-on mower falling to the
ground. Handle the vehicle
carefully and smoothly when driving
on slopes. Do not change speed or
direction abruptly.
On public roads, the machine may
only be transported by means of a
suitable vehicle or trailer. Do not
tow!
15. Standard spare parts
The fastening elements for the
mowing blade (e.g. blade fastening
screw) must be replaced when
replacing the blade, i.e. when
installing the blade. Spare parts are
available from a VIKING specialist
dealer.
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viking MT 4097SX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viking MT 4097SX in the language / languages: English, Danish, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 26,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Viking MT 4097SX

Viking MT 4097SX User Manual - German, Dutch, French, Italian, Portuguese, Spanish - 350 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info