667328
46
Zoom out
Zoom in
Previous page
1/332
Next page
0478 192 9803 B - EN
44
Unscrew the nut (1) from black connection
cable (2) using two A/F 8 spanners and
remove the screw (3), washer (4) and
nut (1).
Detach and remove the black connection
cable (2) from the battery negative (–)
terminal.
Detach cap (5). Unscrew the nut (1) of the
red connection cable (6) from the battery
positive (+) terminal using two A/F
8 spanners and remove. Remove the
screw (3), washer (4) and nut (1).
Remove the red connection cable (6) from
the battery positive (+) terminal.
Remove the battery if necessary.
Reattach screws, washers and nuts to
the battery negative (–) and positive (+)
terminals for safe keeping.
Close the battery compartment if
necessary. (Ö 13.14)
Connecting the battery:
Set battery down.
If necessary, remove the screws,
washers and nuts from the battery.
Attach the terminal connector of the red
connection cable (6) (+) to the battery
positive (+) terminal.
Insert the screw (3) through the bore in the
positive terminal and through the bore in
the connection cable. Fit the washer (4)
onto the screw (3) and screw on the
nut (1).
Tighten the connection to a torque of
4 - 5Nm using two A/F 8 spanners. Fit
cap (5) to completely cover the
connection.
Attach the terminal connector of the black
connection cable (2) (–) to the battery
negative (–) terminal.
Insert screw (3) through the bores in the
negative terminal and through the bore in
the connection cable. Fit the washer (4)
onto the screw (3) and screw on the
nut (1).
Tighten the connection to a torque of
4 - 5Nm using two A/F 8 spanners.
Insert the battery.
Removing the battery:
Disconnect the battery. (Ö 13.15)
Pull out the battery.
Inserting the battery:
Open the battery
compartment. (Ö 13.14)
Connect the battery. (Ö 13.15)
The charge condition should be
checked before installation.
If the battery voltage is lower than
11.5 V, recharge the battery using a
battery charger before installation.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viking MT 4097SX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viking MT 4097SX in the language / languages: English, Danish, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 26,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Viking MT 4097SX

Viking MT 4097SX User Manual - German, Dutch, French, Italian, Portuguese, Spanish - 350 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info