667328

Viking MT 4097SX Manual

42
Zoom out
Zoom in
Previous page
1/332
Next page
0478 192 9803 B - EN
40
Removing the wheel:
Detach cap (1).
Remove retaining ring (2) using a
screwdriver.
Remove large washer (3) and small
washer (4) (only fitted on rear wheel).
Remove wheel (5) from the axle.
Installing the wheel:
The following points must be observed
before installing the wheels:
● Remove dirt from the wheel axle.
● Lightly coat the wheel axle with grease
before installation.
Rear wheels:
Insert the feather key (6) in the rear wheel
axle. Fit the wheel (5) – valve located on
outside – over the feather key and push
onto the wheel axle to the stop.
Push the small washer (4) and the large
washer (3) onto the wheel axle.
Front wheels:
Fit the wheel (5) – valve located on outside
– onto the wheel axle to the stop.
Push the large washer (3) onto the wheel
axle.
Allow the retaining ring (2) to engage in the
groove on the wheel axle.
Fit the cap (1) onto the wheel axle.
● Lift the machine and pull out the
support.
● Carefully set the machine onto the
ground.
13.9 Checking the engine oil filling
level
● Park the machine on a flat, level
surface.
● Stop the engine. (Ö 11.3)
● Engage the parking brake. (Ö 8.11)
● Allow the engine to cool down.
● Open the engine hood. (Ö 13.2)
Please consult the engine instruction
manual for instructions on checking the
engine oil filling level.
When removing the rear wheels,
ensure that the couplers (feather
keys) are not lost.
Before installing the rear wheels,
ensure that the couplers (feather
keys) are located in the grooves of
the wheel axle on both sides.
When mounting the wheels, ensure
that the valves are always located
on the outside.
Check that the wheel is seated
securely.
Avoid damage to the machine.
Check the engine oil filling level
before initial use and before each
use.
Note:
If there is insufficient or no engine
oil, the engine oil must be topped
up.
… 42 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viking MT 4097SX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viking MT 4097SX in the language / languages: English, Danish, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 26,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Viking MT 4097SX

Viking MT 4097SX User Manual - German, Dutch, French, Italian, Portuguese, Spanish - 350 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info