Manual Viking ME 339C (page 32 of 454) (All languages)

667212

Zoom out

Zoom in

1/454

0478 121 9917 E - EN

Take the weight of the machine into

account and use suitable loading aids

(loading ramps, lifters) if necessary.

Avoid contact with the blade when lifting

and carrying the machine.

Only transport the machine once the motor

has cooled down.

Secure the machine and any machine

components being transported (e.g. grass

catcher box) on the load floor using

adequately-dimensioned fastening

material (belts, ropes etc.).

When transporting the machine, always

observe regional legislation, especially

regarding load security and the transport

of objects on load floors.

4.3 Preparations

Persons who are not familiar with the

instruction manual are not permitted to use

the machine.

Observe the local regulations regarding

permitted operating times for gardening

power tools.

Always wear robust shoes and

long trousers when mowing.

Never mow barefoot or in

sandals.

Carefully inspect the complete area on

which the machine is to be used and

remove any large stones, sticks, wires,

bones or other foreign objects which could

be thrown up by the machine.

Before use, perform a visual check to

ensure that the cutting tool, fastening

screws and entire cutting unit are in good

condition, check particuarly for secure

seating, damage and wear (Ö 12.5).

Replace all worn or damaged parts before

using the machine. Replace any illegible or

damaged danger signs and warnings on

the machine. Your VIKING dealer has a

stock of replacement stickers.

Never switch the motor on without a

correctly installed blade. Risk of motor

overheating.

Never use the mower with damaged safety

devices, without functioning motor brake

or attached safety devices, e.g. without the

discharge flap or the grass-catching unit.

For safety reasons, always use an

undamaged grass catcher box.

The switch mechanisms installed in the

machine must not be removed or

bypassed (e.g. by tying the motorstop

lever to the handlebar).

Observe the instructions in section

"Warning - dangers caused by electrical

current" (Ö 4.6).

Use the machine with great care when

working near slopes, terraces, ditches and

embankments. In particular, ensure that

you maintain sufficient distance to such

danger areas.

4.4 Mowing procedure

Keep others, particularly

children, and animals out of the

danger area. Make sure that

others are not endangered.

Do not mow at ambient temperatures

below +5°C (41°F).

Never mow wet grass or mow in the rain.

The risk of accidents is higher if the grass

is wet (increased danger of slipping for

operator).

Only mow during the day or when there is

enough light.

Place the machine on an even surface for

start-up. The machine must not be tilted

when starting the engine.

Exercise care when starting the motor.

Observe the instructions in section "Initial

operation of the machine" (Ö 11.). Keep

your feet a safe distance from the cutting

tool.

Only operate the machine at walking

speed – never run when working with the

machine. Working quickly with the

machine increases the risk of injury due to

stumbling, slipping etc.

Switch off the motor,

– if tilting of the mower is necessary when

transporting over surfaces other than

grass,

– when pushing the mower to and from

mowing areas,

– before removing the grass catcher box.

Always ensure good stability on slopes.

Avoid mowing on excessively steep slopes

in order to prevent loss of control of the

machine.

Be particularly careful when changing

direction on a slope in order to prevent loss

of control of the machine.

Only mow at right-angles to the slope and

never up or down the slope, in order to

avoid being run over by the running lawn

mower in the case of loss of control of the

machine or of falling.

Caution – Risk of stumbling!

Be particularly careful when moving

backwards and when pulling the lawn

mower.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Viking ME 339C in the language / languages: All languages as an attachment in your email.

The manual is 25,17 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Viking ME 339C Manual

Product: