667318
32
Zoom out
Zoom in
Previous page
1/234
Next page
0478 111 9925 B - DE
30
Störung:
Verbrennungsmotor springt nicht an
Mögliche Ursache:
Gashebel ist auf Stopp-Position
Choke ist nicht betätigt
Kein Kraftstoff im Tank
Schlechter, verschmutzter oder alter
Kraftstoff im Tank
Mangelnder Kraftstoffzufluss
Zündkerze verrußt oder beschädigt
Falscher Elektrodenabstand
Zündkerzenstecker von Zündkerze
abgezogen
Verbrennungsmotor ist aufgrund
mehrerer Startversuche „abgesoffen“
Luftfilter ist verschmutzt
Seilzug Gasverstellung ist defekt (z. B.
geknickt)
Abhilfe:
Gashebel in die Choke-Position bzw. in
Start-Position stellen (Ö 10.1)
Gashebel in die Choke-Position stellen
(Ö 10.1)
Kraftstoff nachfüllen (Ö 7.5)
Kraftstoffsystem und Vergaser
reinigen; stets frischen Markenkraftstoff
verwenden @, #, (Ö 7.5)
Kraftstoffleitung prüfen @, #
Zündkerze reinigen oder tauschen @
Elektrodenabstand einstellen #
Zündkerzenstecker aufstecken;
Verbindung zwischen Zündkabel und
Stecker prüfen. #
Zündkerze herausdrehen und trocknen;
Gashebel in STOP-Position stellen und
bei entnommener Zündkerze mehrmals
Starterseil durchziehen; Zündkerze
einschrauben und Zündkerzenstecker
aufstecken. @
Luftfilter reinigen/ersetzen @
Seilzug Gasverstellung reparieren #
Störung:
Erschwertes Starten oder die Leistung des
Verbrennungsmotors lässt nach
Mögliche Ursache:
Mähen mit zu niedriger Schnittstufe
bzw. mit zu großer Geschwindigkeit
Wasser im Kraftstofftank und Vergaser;
Vergaser ist verstopft
Kraftstofftank verschmutzt
Luftfilter verschmutzt
Zündkerze verrußt
Abhilfe:
Schnitthöhe anpassen bzw.
Geschwindigkeit verkleinern
Kraftstofftank entleeren,
Kraftstoffleitung und Vergaser reinigen
#
Kraftstofftank reinigen #
Luftfilter reinigen/ersetzen @, #
Zündkerze reinigen #
Störung:
Verbrennungsmotor stirbt im laufenden
Betrieb ab
Mögliche Ursache:
Kraftstoffhahn geschlossen
Tankbelüftungsschraube geschlossen
Drehzahl
Messerbalken 2800 U/min
Antrieb
Messerbalken BBC
Anziehmoment
Messerschraube 60 - 65 Nm
Rad-Ø vorne 207 mm
Rad-Ø hinten 232 mm
Füllmenge
Grasfangkorb 80 l
Schnitthöhe 25 - 90 mm
Angegebener Schwingungskennwert
nach EN 12096:
Gemessener Wert
a
hw
2,40 m/sec
2
Unsicherheit K
hw
1,20 m/sec
2
Messung gemäß EN 20643
Gemäß Richtlinie
2000/14/EC:
Garantierter Schall-
leistungspegel L
WAd
98 dB(A)
Gemäß Richtlinie
2006/42/EC:
Schalldruckpegel am
Arbeitsplatz L
pA
86 dB(A)
Unsicherheit K
pA
2 dB(A)
L/B/H 176/59/116 cm
MB 756.0 YC
Radantrieb Hinterrad Hydrogetriebe,
stufenlos
Gewicht 60 kg
MB 756.0 YS
Radantrieb Hinterrad Hydrogetriebe,
stufenlos
Gewicht 59 kg
MB 756.0 GS/MB 756.0 YS/MB 756.0 YC
MB 756.0 GS
Radantrieb Hinterrad 3 V (3-Gang)
Gewicht 59 kg
18. Fehlersuche
# eventuell einen Fachhändler aufsu-
chen, VIKING empfiehlt den VIKING
Fachhändler.
@ siehe Gebrauchsanleitung
Verbrennungsmotor.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viking MB 756 YS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viking MB 756 YS in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 13,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info