667312
57
Zoom out
Zoom in
Previous page
1/376
Next page
0478 111 9918 E - EN
17
DE
FR
ENNL
IT
ESPT
NO
SVFIDAPL
26
Mowing blade
maintenance
The adjustment must be
repeated (if necessary,
contact a specialist dealer;
VIKING recommends VIKING
specialist dealers).
CAUTION
Risk of injury!
If, when pulling back, the
driving wheels are locked
when the drive lever is not
actuated, the cable is
adjusted incorrectly and the
mower drive is permanently
activated.
CAUTION
Risk of injury!
If you do not have the
necessary expertise or
auxiliary equipment, please
always contact a specialist
dealer. (VIKING
recommends VIKING
specialist dealers).
VIKING recommends the
use of original VIKING
tools, accessories and
spare parts.
NOTE
Lilt the front of the mower
upwards when carrying out
cleaning or maintenance
work. Before tilting upwards,
empty the fuel tank, detach
the grass catcher bag, fold
down the upper handlebar
(see section “Assembling
the handlebar”) and lift the
ejection flap.
Wheels and gearbox
The ball bearings of the
wheels are maintenance-free.
The vario gearbox and the
three-speed gearbox are
maintenance-free.
Never spray water on engine
components, seals or bearing
points. This may result in
damage and expensive
repairs.
Do not use aggressive
cleaning agents. These
cleaners can damage plastics
and metals, impairing safe
operation of your VIKING
mower.
If you are unable to remove
the dirt with water, using a
brush or a cloth, VIKING
recommends the use of a
special cleaner (e.g. STIHL
special cleaner).
Maintenance interval:
As required (wheel drive does
not engage when the wheel
drive lever is actuated)
The tension of the cable is
adjusted correctly at the
factory. However, the cable
may have to be adjusted
again following an extended
period of use.
The adjustment is made
using an
24= adjustment screw located
on the upper handlebar.
25
Adjusting the wheel
drive cable
Correct adjustment:
The driving wheels must lock
after approx. one third of the
lever travel.
Actuate the drive lever while
pulling the lawn mower
backwards.
The cable tension is
increased by turning the
24= adjustment screw in the
"+" direction, turning it in
the "-" direction reduces
the tension.
CAUTION
Risk of injury!
If the wheel drive cable is
incorrectly adjusted, the
mower may start to move
unintentionally immediately
when started and this may
result in injury or damage to
the appliance.
CAUTION
Risk of injury!
Before tilting upwards, place
the mower on firm,
horizontal and level ground
and adjust it to the highest
cutting level (level 7),
otherwise the mower might
tilt forwards again.
Maintenance interval:
Before each use
Tilt the mower upwards into
the cleaning position.
Clean the mowing blades
and all fastening elements
(retaining washer, blade
fastening screws, guard
plate), check for damage
(notches, cracks or
deformation) and wear
and replace if necessary.
27
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viking MB 655G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viking MB 655G in the language / languages: All languages as an attachment in your email.

The manual is 41,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info