667312
52
Zoom out
Zoom in
Previous page
1/376
Next page
12
0478 111 9918 F - EN
Checking the blade
brake clutch
MB 650 VS,
MB 655 VS/ GS/ RS:
Before starting work, always
perform the following function
test three times:
Start the engine as
described in the
instruction manual.
Engage the blade as
described in the
instruction manual.
A running blade generates a
clearly audible wind noise.
The running of the blade can
be checked by means of the
wind noise generated.
Release the handlebar.
The blade brake clutch
disengages the blade from the
engine drive, exerting a
braking action. The blade
comes to a standstill within 3
seconds.
Initial operation of
appliance
CAUTION
- Carefully inspect the
complete area on which
the appliance is to be
used and remove any
stones, sticks, wires,
bones and other foreign
objects.
- Start the engine in
accordance with the
instructions.
- Be particularly careful
when turning the mower
around or pulling it
towards you.
- Risk of injury!
Never put hands or feet on
or underneath rotating
parts.
- Always wear robust shoes
with high-grip soles and
long trousers when
mowing. Never mow
barefoot or, for instance, in
sandals.
- Never mow in the vicinity
of other persons,
particularly children, or
animals.
Blade brake clutch (BBC)
The MB 650 VS, MB 655 VS/
GS/ RS appliances are
equipped with a blade brake
clutch:
The mowing blade can
be disengaged while the
engine is running by
operating the
T= blade stop lever and the
U= blade clutch lever (two-
handed operation).
Following disengagement
(release of the
T= blade stop lever) the
mowing blade is
disengaged and brought
to a standstill within a
few seconds (see section
"Engaging/Disengaging
the mowing blade").
The engine continues to
run.
4
CAUTION
Risk of injury!
Two-handed operation must
not be bypassed, e.g. by
tying the blade stop lever
(T) to the handlebar.
CAUTION
Risk of injury!
The motorstop device must
not be bypassed, e.g. by
tying the motorstop lever (T)
to the handlebar.
Motorstop lever
The MB 650 T/ V/ VE/ VM/
VR, MB 655 V/ VM/ VR/ G are
equipped with a motorstop
device.
The engine with the
mowing blade stops
immediately when the
motorstop device is
triggered (release of the
T= motorstop lever) and
comes to a complete
standstill within 3
seconds.
Measuring the run-on time
Following engine start-up, the
blade rotates and a wind
noise is audible. The run-on
time corresponds to the
duration of the wind noise
after releasing the motorstop
lever. This can be measured
using a stopwatch. If the time
is exceeded, the machine
must not be operated. Consult
a specialist dealer; VIKING
recommends VIKING
specialist dealers.
4
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viking MB 655G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viking MB 655G in the language / languages: All languages as an attachment in your email.

The manual is 41,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info