12
0478 111 9912 I - EN
Standard spare parts
Mowing blade
MB 443, MB 443 C,
MB 443 T, MB 443 X
6336 702 0100
Mowing blade
MB 448, MB 448 T, MB 448 TX
6356 702 0100
Environmental
protection
Lawn cuttings should
be turned into com -
post and should not
be disposed of with
the household waste.
The appliance, its packaging
and accessories are all produ -
ced from recyclable materials
and must be disposed of
accordingly.
By disposing of materials
separately, and in an environ -
mentally-friendly manner, valu -
able resources can be re-
used.
For this reason, the appliance
should be disposed of for
recycling after completion of
its useful life.
• Unscrew spark plug and
pour approx. 3 ml of
engine oil into the engine
via the spark plug hole.
Turn the engine several
times with the spark plug
removed.
Caution:
Keep the spark plug
socket away from the
spark plug hole due to
danger of ignition.
Re-install the spark plug.
• Perform oil change.
• Cover the engine well and
store the lawn mower in a
dry, dust-free room in the
normal position.
Storage
The storage room should be
dry and be free of dust. The
mower should also be stored
out of reach of children.
Any appliance faults must be
remedied prior to storage in
order to maintain a safe
operating condition. Empty
fuel tank and carburettor (e.g.
by running empty).
Winter break
Note the following points
when storing the mower for
long periods:
• Carefully clean all external
parts of the engine and
mower, in particular the
cooling ribs.
• Thoroughly
lubricate/grease all moving
parts.
• Empty fuel tank and
carburettor (e.g. by
running empty).
The adjustment must be
repeated (if necessary,
contact authorised customer
service).
CAUTION
Risk of injury!
If, when pulling back, the
driving wheels are locked
when the drive lever is not
actuated, the cable is
adjusted incorrectly and the
mower drive is permanently
activated.
Minimising wear and
preventing damage
Important information on
maintenance and care of the
product group
Petrol Lawn Mowers
Please always observe the
following important information
for the prevention of damage
or excessive wear to your
VIKING appliance:
1. Wearing parts
Some parts of the VIKING
appliance are subject to normal
wear even when used properly
and must be replaced in due
time depending on type and
duration of use.
These include:
- Blade
- Grass catcher bag
- V-belts
(for MB 443 T, MB 448 T,
MB448 TX)
NOTE
The fastening elements of
the mowing blade (e.g.
blade fastening screw, lock
washer) must be replaced
when replacing the blade or
when installing the blade.
Spare parts are available
from a VIKING specialist
dealer.
